Just reverse the connection at the device end, swap pins 2 and 3.
Or cut the cable...
Type: Posts; User: mackrackit; Keyword(s):
Just reverse the connection at the device end,...
Just reverse the connection at the device end, swap pins 2 and 3.
Or cut the cable...
Make sure the cable is not for a modem. Pin 2 on...
Make sure the cable is not for a modem. Pin 2 on one end goes to Pin 2 on the other, the same for pin 3.
Test PC serial port by jumping PINs 2 and 3 with a 10K and use a terminal to see if you get...
Can you post your schematic and/or a picture of...
Can you post your schematic and/or a picture of your setup. I think it is down to a hardware problem now.
Caps on the 232?
Cable is straight through?
Usb to serial converter?
Real serial port?...
Maybe this will help....
Maybe this will help.
http://www.melabs.com/resources/samples/pbp/usart.bas
Missed this the first time I looked at it....
Missed this the first time I looked at it.
DEFINE HSER_BITS 9
Scratch the above line
Do you have a MAX232 or similar between the PIC...
Do you have a MAX232 or similar between the PIC and PC?
If you do not have one, try SERIN2/SEROUT2 using inverted mode.