ahh thanks! so simple yet it never occured to me.
much thanks again!
Type: Posts; User: kamet; Keyword(s):
ahh thanks! so simple yet it never occured to me.
much thanks again!
if i have a hex byte, say "FF", is there something to read the first 4 bits and last 4 bits individually? or put it into another variable? Something simliar to reading a WORD variable using...
PoTeToJB, I don't think you can save the settings when you disconnect the phone. If somebody knows how to, I would like to know that as well because I can't save it myself. I always initialize the...
Try this setup to initially change your cell's default setting.
to set up, try this:
at+cmgf=1 (set to text mode)
at+cnmi=2,1,0,0,0 (set to hear sms delivery response on terminal)...
You would use the SERIN command to listen to the cell phone. If your microcontroller needs to do other things and can't be completely hung up on just listening to the cell phone, you can set the...
http://developer.sonyericsson.com/getDocument.do?docId=65054
Does it not display anything at all or is it displaying "garbage" response? Where in your code does it display the response? The garbage response you see in your hyperterminal is because the cell...
I'm sorry but I don't know how to interface it by USB directly, however, you may want to search for a "virtual serial port driver" for your USB. The driver will trick your application into believing...
You don't need to use a PIC to interface your cell to your PC, you just need a data cable and program the computer to listen on its serial port for AT commands and responses which the cell phone...
YES it works! Thanks, paul borgmeier, for pointing the grounding misunderstanding out. I *assumed* that it was separate from the 5v out of the regulator and was being fed directly from the power, so...
here's the schematic
<a href="http://img214.imageshack.us/my.php?image=picservo5ew.jpg" target="_blank"><img src="http://img214.imageshack.us/img214/7594/picservo5ew.th.jpg" border="0" alt="Free...
I tried to shorten it like you said (and even tested it in the entire range of 10 to 25ms!)...no luck on that either, exact same response.
The servo is grounded with the common ground of the...
For some reason, I can't understand why my servo will only move to the position of the first servo position's loop and then ignore everything else. I tried both pulsout as well as HIGH/LOW loops. It...