Thank you for the fast response!
Regards
Type: Posts; User: jrt4fun; Keyword(s):
Thank you for the fast response!
Regards
Hello,
I've been reading through the posts regardings the Instant interrupts.
I'm still a little confused on the usage or setting of the ResetFlag.
Maybe I overlooked it in the posts but I did...
Hi,
I recently bought a XM10E of Marmitek (TW-523) and was using the Xout commands.
Unfortunately it didn't seem to work.
After reading through the forum a member mentioned something about the...
Have a look here: www.picbasic.nl
Under Projects you will find this link: The TV-remote RC5/RC6 codes on a LCD
Bare in mind that the code is written in Proton picbasic!
I guess you will have to...
Hi guys,
Sorry for the late reply but here is the code:
@ DEVICE pic16F876A, HS_OSC
' System Clock Options
@ DEVICE pic16F876A, WDT_OFF
' Watchdog Timer
@ DEVICE pic16F876A, PWRT_ON
'...
Hello,
I wrote a program where I'm collecting data using the internal uart of the Pic16F876A.
In my main loop I check the status of the RCIF flag. When the flag is set I'm collecting the data...
Hi there,
This weekend I received my EM202. It's a nice gadget :-)
Easy to set up, 5V, ethernet and serial connection... off you go.
I have to say it uses quite some power and this might be a...
Hi Christopher,
Have a look at this: http://www.eztcp.com/en/index_en.html
This might help you...
I haven't used it but I'm planning to order one in the near future. (the EZL-70)
When I have...
Hi there,
I use the same board without any problem.
I just used a standard nullmodem cable.
Regards,
I've also been thinking in the direction of using the IR port.
Now what puzzles me is it IRDA or just some common IR signal that should be used?
This might sound quite blunt but do you happen to...
Hi Melanie,
Thank you for your quick reply.
I will go for the second option it seems easier that way.
Best regards,
Hello,
I'm having some problems with an HP pocketpc.
I want to connect a serial GPS to a HP 1915, now here comes the problem this type of pocket pc does not have a serial connection but only a...
Bruce,
Thanks got it sorted out.
Appologies for the late reply
Hi there,
I'm struggling a bit with testing the status of PortB pin of a Pic16F876A.
I want to be able to read the state of one of the pins of PORTB based upon a variable....
Hi guys,
Thank you for the information !!!
Now I can finalize my PCB :-)
Best regards
Hi,
I'm creating an application that reads the state of 4 relays (NO contacts) to PortA0 - 3 of a Pic16F876A.
I was wondering whether I need to implement a buffer circuit to shape the input pulse...
John,
Have a look here: http://www.picbasic.nl/indexes_uk.htm
It's the site from a guy who made some RC5 applications.
The programs are written with Proton Plus so the timing, which is quite...
Greetings,
This just to inform you that I had the pic verified by a friend of mine with another programmer and it gives the same result.
Tried to make a simple led blink as you suggested and...
Hello,
I use the same programmer and is working just fine with the IC-prog software. Be sure to select the JDM settings.
I even use it to program 24Cxx devices via the ISCP header.
In case you...
Dear,
I'm quite interested as well.
email: [email protected]
Thank you
Best regards
Hi guys,
Unfortunately no joy.
I removed all config settings an d set manually on the programmer software but this didn't change a thing.
Could it have something to do with the programmer or...
Hi Frank,
The cheapest solution I found was a Siemens C35 (S25 will also do).
This accepts AT commands at 19200baud without any problem.
However a bit tricky if you want to use SMS as it only...
Hi,
I payed extra attention to the point you just mentioned about the device lines. Also during compiling and programming I made sure the right components have been selected.
What I certainly...
Hi guys,
Thanks already for the feedback!
Attched is the code.
Regards
Steve,
I also tried it with the HSERIN command same effect here.
The component I have conected to the portc.7 is the output of a max485 (rs485 driver).
Regards,