Hello Henrik,
I set the baud rate to 38400, that helped a bit.
Then tried set the LCD_COMMANDUS to 1500 that gained hardly anything but made the LCD a bit unreliable.
The count time is down to 75,...
Type: Posts; User: Mugelpower; Keyword(s):
Hello Henrik,
I set the baud rate to 38400, that helped a bit.
Then tried set the LCD_COMMANDUS to 1500 that gained hardly anything but made the LCD a bit unreliable.
The count time is down to 75,...
Hello Henrik,
i used a scope and found out that the 16F88 program runs with about 60Hz.
So the 18F1320 doesn´t have to wait too long.
The 18F1320 program runs much slower. If I count only 50ms it...
Here three pics of that housing and so on:856685678568
Hello Henrik,
thank you for your suggestion
here:
'************************************************* ***************
'* Name : PUMP16F88V1 *
'* Test with...
hello Henrik,
I thought HSERIN/HSEROUT would automatcally take care of the handshake. In the background.
On the other hand i could put some more debug commands into the 16F88 code so that it...
Hello mpgmike,
you are totally right. Problem is: I already made the PCB for this double-PIC Project and it works halfways.
If I had to begib new i would take your advice and get the 18F26k22....
can I use "on interrupt" or do I have to use DT´s interrupts?
I hoped PBP3 Gold had swallowed up these advantage.
Hello mpgmike,
thanks for your offer.
I decided to use two PICs because I´m too dumb to program everything correct to do the project with one PIC.
Reason is I began setting footsteps into the...
hello Henrik,
for your entertainment a picture that shows some of these clunky metal chunks that are at the center of my profession. Just imagine the mental distance between bringing these chunks...
Hello Henrik,
the HPWM glitch doesn´t matter because its driving an electric fuel pump.
I read the UART section in the old PBP handbook and it says: "very complicated" which is a nogo for me ....
Hi folks,
I´m working on my 18F1320 + 16F88 projekt and ran into the following problem:
The 16F and the 18F are communicating via debug/debugin which works great.
The 18F shows on LCD but has...
Made several mistakes, killed one 18F1320 don´t know how , destroyed my PICKIT operating system, had to desolder and solder one 18F1320, BIG Mistake in the schematic: I had to use the lower 4 bits of...
Old Farts and Computers,
here we go...8548
Hello Henrik,
I´ll try to get the image. No didn´t work, had 8MB Picture max is 1 MB.
Hello all around!
I tried to put a EAGLE schematic attachment into this and I got the answer "Invalid file". How do I convert an Eagle document? I have to save PBP docs into txt format to post them....
Have nice holidays and sort of!
I built a project with a 18F1320 and a 16F88.
The 18F1320 has an external oscillator with 20 MHz that goes to CLKI and should squeeze 20 MHz out of CLKO (RA6)...
Hello Demon,
I´m not shure if I have one. But I can link to a video of her other Mustang. Yes my wife has two of them and yes both are red but the older one 1979 is a coupe and the 1983 with the...
Hello Acetronics2,
now I guess I know how to post pictures.
8535
Hello Folks,
so at least I got it working. No loud laughs please, I'm too old to stand it.
Code is like this:
TX
'****************************************************************
'* Name :...
8528
This is my wife and the car that needs an electronic update.
Bought PBP3 gold yesterday.
will try Henriks code with PBP3.
4 years are gone and I bought PBP3 Gold. I have the tendence of purchasing an excavator for planting a pansy.
Hello Acetronics2,
i installed PBP3 and everything on my Laptop which runs Wndows8. But still get this "Not all words are hex" warning while programming. Will hardware test it at the weekend.
...
Hello Richard,
to be shure I ordered PBP3 Gold and Microcode studio 5.0 today. Will see if that helps. One question: What Computer do I need for that software?
Regards
Mugel
Hello Richard,
I´m using an old PC that runs XP Professional.
MPLAB IDE v 7.61
Microcode Studio 3.0.0.5
Compiler Picbasic Pro 2.50C
Programmer PICKIT2 and 3
Complete Code:
Hello Richard,
i tried your example and i get compilation error "DEBUG " bad expression or "SERIN2 bad expression"
I even used a PBP example that was delivered with my software and I get the...