Hi all
I`m grabbing the serial number from an iButton in 6 array bytes. The full number is 12 digits, 2 per byte. Normally I output the number by serial using the HEX2 prefix to give 00 to FF...
Type: Posts; User: enigma; Keyword(s):
Hi all
I`m grabbing the serial number from an iButton in 6 array bytes. The full number is 12 digits, 2 per byte. Normally I output the number by serial using the HEX2 prefix to give 00 to FF...
There is a thread in the PBP wish list, I suspect as CuriousOne says there isn't one, least there doesn't seem to be the will to do much in the way of improvements
Hi Henrik
Yes there is an AT command but its not that consistent. I`m looking at monitoring this from the main look, unfortunately I`ve already got the hardware so I cant easily add in the...
Hi All
I'm running a GL865 and it would be useful to know the network registration status by monitoring the status LED. When the module is not registered the status pin is low for around 1 second...
Hi Norm
I`m wondering if its permissions. If I edit the ini file manually and add in the paths its OK, it just wont select and add from the program. Long shot but have you a debug version which will...
Hi Norm
Tried it root C: Program files, desktop even via dropbox. I can find and select for example the compiler, click OK then if I try to select a PIC from the dropdown I get "Find PBPx.EXE in...
Hi Norm
Yes, I tried both adding it manually and also ticking the box when its automatically found. It does the same thing with the compiler too. I did add it manually to the ini file and that...
Hi All
Has anyone got V3.3 running on windows 10?. I can set PBP3 path etc in options but it forgets it after selection.
Cheers Pete
Hi
I think it depends on the manual you have, mine has MOD as a reserved word in it but an earlier version does not.
Cheers Pete
Hi Heckler
So how do you translate this bit of code into PICbasic??
DSTStart = (31 - (((5*Year)/4)+ 4) mod 7)
The whole subroutine is cut directly from my PBP program and will work as is. ...
Hi All
I've used this for many years, works for Europe and I suppose could be adapted for USA. DST Europe changes in March or October, last weekend of the month. The routine calculates the date in...
Thanks! That's got it up and running, Cheers Pete
Hi All
Not used this PIC before, trying to read a voltage on AN0 pin17 but get the same result on my serial out for any input, 5235. I suspect I`ve either miss configured a register or missed one...
I`m still looking too, there must be something out there. I was monitoring this project http://www.rcgroups.com/forums/showthread.php?t=1290963 but it seems to be dead now. B&W only but had...
does anyone have any meaningful information on an update to PBP3. I have used PBP since it launched and I`m comfortable with it, but I`m hitting limitations with both it and the IDE which equally...
That's possible, I am not using timer 1 though so I will look to disable it. Unfortunately this is a PIC upgrade from a 12F683 so I am stuck with using the same pins for this app. I've sent a support...
Hi All
I LED on the same pin configured to blink once per second, does just that so I am pretty sure some configs are right. I`ll try the last suggestions and see before I put in a support...
Yes 9600 inverted and the same line works correctly on other PIC types I have tried, its only with the 12F1840 it doesnt
I now have the code below. The serial data appears to come out at intervals of one second but is complete garbage still. Replacing the PIC with an appropriately configured 12F683 all functions fine....
Many thanks, I will run through these and see. These seem tricky beasts to set up and I am sure I have probably not set something I need to. Will report back! Cheers Pete
Hi All
I searched for an answer to this but came up blank. The program has been reduced to a single serout2 command to test. It works fine on both a 12F683 and 16F688 with the correct configs but I...
Where are you based?
Cheers Pete
Hi Isaac
Its the GM864-GPS which is the same as the basic GM864 but with built in GPS. I buy these direct but they are obtable from Sparkfun I think along with a dev board to mount it on.
...
Hi Isaac
I`ve used the Tellit GM864 sucessfully in data mode for socket to socket communications and also http posting of data to a webserver which is probably the less complicated way to send...
Hi All
Anyone know of a boundschecker for PBP?. I have just discovered after using PBP for years that you can due to an error in my program, address an array element that doesnt exist and the...