HI all,
1- Mackrackit
it's not working where you place them but it's working when i do :
DEBUT:
ENABLE
...
...
...
DISABLE
Type: Posts; User: Automan; Keyword(s):
HI all,
1- Mackrackit
it's not working where you place them but it's working when i do :
DEBUT:
ENABLE
...
...
...
DISABLE
HI,
i'm trying to generate two oposite 16HZ square wave with a 18f452 but i'm lost
here is the code i am trying to use:
' --------------
' ...
it work fine now!
thanks a lot
merci beaucoup et bonjour de france
i'm trying to do a 1750Hz tone générator on 12c508a and it doesn't work so i reduce the code and test it on 12f683 (with the right fuse!) and it run ok so i test it on 12f508 it doesn't run too....
Thanks for your help!
I really do a big mistake!!
I wrote :
' gpio.4 ==> entrée tension de réglage vitesse
so i do use ADCIN 3 and not ADCIN 0
Now my PWM works and i'm going to test my...
HI, thanks for the reply,
I have got make some test with the LED output, all get right before the PWM instruction (i make the LED blinking) but it seems that the program freeze after. I can post...
HI,
excuse me for my poor english.
I use :
PIC : 12F683
PBP : 2.46
programmer : labtool 48UXP
I'm trying to use, on 12F683, the comparator (mode comparator without output) and PWM...
HAPPY CHRISTMAS TO ALL
AND THANKS TO ALL WHO HELP BEGINNERS LIKE ME ON THIS VERY GOOD FORUM !!
JEAN-FRANCOIS
HI everybody,
I've got a problem with 18F452 and picstart plus.
-PIC18f452
-PBP ver 2.45
-MPLAB ver 6.61.00.0
-MPASM ver 03.80.03 all setting to DEFAULT
-PICSTART PLUS with upgrade kit and...
HI mister_e
the firmware v3.11 is the last with pic17c, for the newer firmware i should buy the upgrade kit.
so i can't do the test now.
HI,
yes i've got upgrade my picstart plus with 17c and firmware v3.11
à bientôt
HI mister_e
1 - if i remove all the configuration fuse setting and do it manually on my programmer it's the same result
2 - i always erase the chip before i program it
3 - i program it...
HI mister_e,
its the same result
i have a old 'picstart plus' i'm going to try with it, may be my programmer is out
i let you know the result
i have trying with rcon=0 but no more result
HI all
"I've got a problem!", i wrote a piece of code for the 16F877 which works fine but i haven't enough memory to continue.
So i have decided to move it to 18F452 but it doesn't start.
...
HI all,
look at :
http://www.compsys1.com/workbench/pUSB/pusb.html
note:
microchip will release (soon please !!!!) 4 new PIC with USB and flash !
Bonjour,
found on this forum
http://www.picbasic.co.uk/forum/showthread.php?s=&threadid=316
thanks to salutatous
HI all,
it seems that RS485 will be the best way to do your communication between your cards.
you could find some examples at:
...