Search:

I have used these encoders and still have problems, I tried code supplied on this forum and it still does the same thing, it jumps up by 2 values instead of one ( rotate right one click generates 2...

Send an email to mechanique with a request for your required frequency, I did it to get a 10 mhz version, they replied within a day.

Cheers, Nigel
Queensland , Australia

Thanks for that Art, will give it a go .

Cheers

Nigel VK4FNA (Lake Moogerah, Queensland )

Thanks Robert, it sort of makes sense now and yes there is a position where it stays high, or low. They are a very reliable pot, we have used well over 6000 in our radios over the years with very...

O.K, will try it and see.

Nigel

Hi Dave,

O.K on the encoder, did you manage to get it to go up by one, even though it has two steps for one turn? or does the cap R/C take care of this.

Yes when the receiver goes I will, it...

O.K , glad to see it arrived safely.

Cheers

Nigel

Dave,

I tried it out and it is counting nicely, but still in increments of 2! It seems to think that the encoder has transitioned twice ( both going high, albeit one in front of the other ) so it...

Thanks Dave, I owe you a beer! Will try this out and post results. The 2 metre receiver works a treat, better than .2uv for 12 db sinad and the frontend tracks nicely. It will cover 108 to 161 Mhz.
...

Thanks Dave, will give it a go and see what happens.

Cheers

Nigel VK4FNA

G'day forum people

I have a small problem getting a dual encoder from ALPS to work, it is the type that when you go right, both outputd rise or fall, one slightly in front of the other, depending...