Search Results - MEL PICBASIC Forum

Search:

Type: Posts; User: csantex; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Re: In need of accessing more than 255 bits in a byte/word array.

    Thanks for the link sayzer! I have read it before a long time ago and it was very helpful at the time. As it turns out, the method stated by melanie does not coincide with what the manual states. I...
  2. Re: In need of accessing more than 255 bits in a byte/word array.

    Thanks Richard. I already use a similar approach to set and clear the bits within my array but it's not as elegant as yours.



    BrdCountLp0 = Address/16 ; I divide by 16 to select the...
  3. In need of accessing more than 255 bits in a byte/word array.

    Hello all.

    I'm sure this question has been asked a million times before but has anyone found a way to access more than 255 bits in a byte/word array with a variable bit index?

    Any and all...
  4. Re: Question regarding Interrupt handler - No DT_Ints used.

    Thanks for your input tumbleweed. What you said coincides with what I have been able to gather by looking at the LST file. As Richard pointed out, I may have been stepping on system variables but...
  5. Re: Question regarding Interrupt handler - No DT_Ints used.

    Thanks for the advice pedja089. I couldn't make it work as you suggested but I did manage to get it to work this way:

    ...
  6. Re: Question regarding Interrupt handler - No DT_Ints used.

    Thanks for all your help Richard.
  7. Re: Question regarding Interrupt handler - No DT_Ints used.

    I tried to show it in code quotes but it was too long. Please look at the attached file.
  8. Re: Question regarding Interrupt handler - No DT_Ints used.

    I like it too! There is just not enough room to use it. Thanks all the same.
  9. Re: Question regarding Interrupt handler - No DT_Ints used.

    Thanks for the pointer Richard.

    I have looked through the entire LIST file not sure what I was looking for.
    I looked at the following variable/ram locations and there were no inconsistencies...
  10. Re: Question regarding Interrupt handler - No DT_Ints used.

    Richard,

    So doing it this way as well " is a recipe for failure"? Please see example below.



    '*******************************************************************************
    '* Name :...
  11. Re: Question regarding Interrupt handler - No DT_Ints used.

    Ok thanks!
  12. Re: Question regarding Interrupt handler - No DT_Ints used.

    Thanks for your reply Richard.

    So basically what you are saying is that the example below is incorrect?


    Define INTHAND OutputControl
    ...
    ...
    ...
  13. Question regarding Interrupt handler - No DT_Ints used.

    Hello everyone.

    I'm just wondering if I should be concerned when using an inline assembly interrupt handler to save w, status and pclath, then using pbp code to something, then reverting back to...
  14. Replies
    10
    Views
    2,492

    Re: PIC18F67K40 DT_INTS that really work.

    I see that now.
  15. Replies
    10
    Views
    2,492

    Re: PIC18F67K40 DT_INTS that really work.

    Dave,

    Ok so I did the experiment but I used two identical timers with identical settings and I ran them both using the same format I've been using and also using the format described in you post...
  16. Replies
    10
    Views
    2,492

    Re: PIC18F67K40 DT_INTS that really work.

    Dave,

    I have never used a "DEFINE USE_LOW/HIGHPRIORITY 1" for any of the interrupts I have used at work or for personal projects while using DT_INTs.
    I just set the bits accordingly as shown...
  17. Replies
    10
    Views
    2,492

    Re: PIC18F67K40 DT_INTS that really work.

    If you mean code examples, this is what I am currently working with as of now, mind you I'm running this PIC at 64Mhz.

    I haven't gotten to the 3rd high priority interrupt, which is next on my...
  18. NRF24L01+ CODE Example for 1 to 1 data communication using same code on 2 PICs.

    '****************************************************************
    ; This code allows for data communication between 2 NRF24L01+
    ; modules running on a PIC microcontroller using the MSSP module.
    ;...
  19. Replies
    10
    Views
    2,492

    PIC18F67K40 DT_INTS that really work.

    '****************************************************************
    '* Name : DT_INTS-PIC18F67k40.bas *
    '* Author : Darrel Taylor *
    '* Notice : Copyright (c) 2003 *
    '* Version : 1 *
    '* Date : JUL...
  20. Replies
    5
    Views
    1,102

    Re: PIC18F67K40 Timer issues

    Richard, thank you for responding to my plea for help. I looked at the link you provided and I can see that it will come in handy.
    Fortunately, I found the cause of my issue. With tumbleweed's...
  21. Replies
    5
    Views
    1,102

    Re: PIC18F67K40 Timer issues

    After experimenting for a few days, I cannot get any timer interrupt to work. I even went as far as using assembly interrupts that I wrote while not using the DT_INTs-18. Nothing seems to want to...
  22. Replies
    5
    Views
    1,102

    Re: PIC18F67K40 Timer issues

    Hello tumbleweed.

    Thanks for posting the additional lines of code. Unfortunately, it didn't help. I also searched for version 3.4c but was not able to find it. I managed to find version 3.4b...
  23. Replies
    5
    Views
    1,102

    PIC18F67K40 Timer issues

    Hello everyone.
    I'm currently working with a Pic18f67k40. The issue I'm having is that the timers (1 or 2) don't seem to work. I've modified DT_INTS-18 to work with this pic but my timers still...
  24. Re: Rotary Encoder on 20x4 LCD with pushbutton digit select and other features

    For anyone interested in Richard's code example and how it works, watch the video below.
    The video shows most of what the code does. Thanks for sharing Richard.

    csantex

    ...
  25. Re: Rotary Encoder on 20x4 LCD with pushbutton digit select and other features

    Yes now it does and I now see what you meant by scalable. Range is 000.00 to 599.99
    So at startup with no button push, the knob does nothing until the user is ready to use it.
    Push Button, user...
Results 1 to 25 of 34
Page 1 of 2 1 2