Hello friends,
I've completed the test with the code and have not had any problems so far, will continue to test and if they notice something new.
...
Type: Posts; User: Leonardo; Keyword(s):
Hello friends,
I've completed the test with the code and have not had any problems so far, will continue to test and if they notice something new.
...
Thanks Aratti
Hello mackrackit,
I have added TRISB =% 00001111 but as usual the code does not work well.
Thanks
Leonardo
TRIS Series I have not configured but the code does not work well.
Hello forum friends,
I have 4 buttons connected to PORTB and 4 LEDs to PORTB, I turn on and off with the same button for the LED but independently, with this code does not work properly any...
Hello Fratello,
Exactly what is needed for the battery charger when the voltage divider delivers eg 60mV to the GP2 pin 7 is low and cut the load to the battery.
greetings
I need to know how can I implement the code of the forum and if someone can help me.
Hello friends,
I want to make a 4 battery charger for NiMH 2700mA using a pic12f675, the idea is that the LED stays on when the batteries are loaded and off when they have reached their full...
Excellent!
Greetings
Ok Darrel.
Darrel,
Thanks for your answer, I have further questions, I would like for example using three buttons change the hours, minutes and seconds for the LED turns off once the time. With this code...
Hey Darrel,
The code can also be used for hours and days?.
Thanks
Hello,
They can tell me how can I make a delay of 1 minute 30 seconds using this code. I have tried in various ways without any result.
Thank you
CLEAR
LED VAR GPIO.0
CMCON = 7...
Hello,
¿How can I change the baud rate to 2400?. ........ Solved
Thank you
Hello,
You can put the schema to understand it better.
Thank you
Hello,
How to do a test to a RS232 serial port so that it can assess the functioning of the lines TxD and RxD using using for example a pic12f675 or pic16f628.
Thanks
Hello,
I doubt arises as to obtain such a delay of 1:20 hours and minutes.
Thanks
Hello mackrackit,
With this code can test the operation of a port rs232 with a pic?, I can say that pic would be used and the configuration of the pins is very interesting!.
Thank you
Steve,
I'm using an external 4MHz crystal and the code is this for PIC12F675.
CLEAR
LED VAR GPIO.0
CMCON = 7
ANSEL = 0
Include "Elapsed.bas"
Steve,
Perform tests on a 4-MHz external crystal setting 1 hour and was led off in 56:41 minutes of taking a delay time of 3:06 minutes. Is it normal that delay?.
Thank you
Steve,
I've done some testing with minutes and works extremely well using a 4-MHz crystal, the oscillator's internal PIC12F675 is not very accurate there is any way to use it with good...
Steve,
Did not take into account the memory banks and compiles well, will do some tests and the results then I said.
Thank you
Hey Darrel,
In compiling I get this error because it will be.
<a href="http://imageshack.us"><img src="http://img231.imageshack.us/img231/9863/errorcv5.jpg" border="0" alt="Image Hosted by...
Hello,
This is the code I've tested with 1 minute and works well, then put 7200 can achieve the 5 days with a good presicion?.
led1 var portb.0
x var word
HIGH LED1
Top:
Hello Acetronics,
You can give me an idea or an example to start.
Thank you