Scampy, these solid state switch come already equipped with a current limiting resistor already integrated inside the switch.
If you place a led with its resistor in parrallel to the ssr there is...
Type: Posts; User: Alberto; Keyword(s):
Scampy, these solid state switch come already equipped with a current limiting resistor already integrated inside the switch.
If you place a led with its resistor in parrallel to the ssr there is...
Well, I have to say that while I was learning (and still learning) to code in python 3, I have found all the library in use in my code all well and professionally documented. I think python is the...
Ioannis, taking into cosideration the economic and technical aspects of my decision, please read the technical features of raspberry pi 0 w
2835 SOC @ 1GHz
1GHz
512MB of RAM
On-board Wireless...
Well boy, let me jump into this thread with my experience. As a pure hobbist, I moved to raspberry 3
And I have forgotten pbp3 and pics. Don't know why arduino never attracted me.
With raspberry...
A circle does't have volume! Very likely you meant Area.
Alberto
Thank you for the answer!
Alberto
Just two simple questions:
Is the book finished?
Why I cannot read it with my IPAD?
Alberto
Thank you mgpmike for posting the code. That's just what I needed to understand how to use the 2nd uart (this is my first time)
I noted that you define the uarts prior to include the DT interrupt....
Thank you for pointing out that 18f26k22 is still in production! This will save me the money and trouble to update my pbp3 ( you never know how it will end up the update!). Additionally, the suggeted...
Thank all for the quick reply! I will check @ melabs site how to update my pbp3. You didn't mention the U2 programmer. Does it upgrade automatically with the pbp3 upgrade?
@ Dave:
I did...
I have in mind a new project where I need two uarts com ports, so I did search microchip site and found the pic 18F26k40 to suite my need. As a second step I did check if my pbp3 (ver 3.09.4) was...
Tank you George for the additional input. Yes read and write to LAT register seems the correct way to go. I did change the original alias from (led var portA.5) to (led var LATA.5) and everything...
Ok problem solved!
It was the ansel register that was not set properly so portA.5 was set as analog and hence not responding to a digital command.
Thank you again.
Alberto
Thank you Dave for your answer.
The fact is that I am a litlle lost with this LAT register!
I have a blinking led connected to portA.5 and with 18f2620 I used the alias : Led var portA.5, then...
I have recently changed mcu for memory space. I moved from 18f2620 to 18f26k20. But the new pic needs the LAT instruction to work properly.
Now I have several alias like:
Bit_Out0. Var portA.6...
Yes I have pbp3 golden edition and the cip is listed and found. The program meCONFIG is an important tool (at least for me) and it is a pity not maintaining it! I have read several thread where Mr...
I did purchase some pic 18F1330 for a new project I have in mind. Unfortunatly I discover that this device is not present into my meCONFIG program. I did check at Melab site but could not find any...
Thank you Henrik, very kind of you.
Alberto
I need to change The baud rate from 9600 to 115200 and then back to 9600. I did try with define but PBP3 does'nt like it and gives error at compiling. Is there a way To do the baud Switching from...
Thank you Dave for the code posted.
At the late, I should start playing with the code next Friday. I am sure I will came back with more question on this subject!
By now thank you again for your...
WHOA! What a great gift I have received! Thank you Richard for the link, the code is over any expectation of mine!
I should learn how to search the forum properly, because the link didn't show up...
Dave, I am not using "parasitic power" and I understand the convenience to use a single bus for all three devices. But the failure in using "search rom" and "match rom" command, along with my strong...
No! I didn't realise the convertion was such a slow process!
Well I need to modify the code to cope with this necessary delay.
Thank you Richard to have brought to my attention this problem.
...
pic 18F2620
Owin portB.5 ,0,[strDta\9] (works!)
Owin 5 ,0,[strDta\9] (works!)
mypin var byte
mypin=5
Owin mypin ,0,[strDta\9] (doesn't work!)
PBP manual states that in 28 pins mcu portB = 0-7!
I did try:
Use_pin = 5
Owin use_pin,0,[strDta\9]
But it doesn't work.