Darrel,
I got it to work....
I had to remove the PICkit2 programmer from the IDE list of programmers and then re make the custom programmer again from scratch.
It seems that you cannot edit both...
Type: Posts; User: tcbcats; Keyword(s):
Darrel,
I got it to work....
I had to remove the PICkit2 programmer from the IDE list of programmers and then re make the custom programmer again from scratch.
It seems that you cannot edit both...
I just set the IDE default file to the PICkit2 folder for my testing.... with a LED light blinker test program.
The -h2 does nothing I tried -h5 ....+ all combos etc with no change in the way the...
Darrel,
I changed the programmer exe and now I get a dos window for a short instant... then it goes away... It is so fast that I cnnot see anything in the window.... programmer does nothing and...
Darrel,
I set up my programmer as you directed and still get the same results...
The PICkit2 application starts and and just shows that it found the connected PIC... thats all. I have to manually...
Darrel...
Did this give you the one click flash function from the IDE?
-pPIC$target-device$ -f$hex-filename$ -M -R -T -h2
I tried this and several variants with no luck.
The programmer...
Thanks Darrel,
I will check it out...
tcbcats
Maybe I did not ask my question in the correct way...
The IDE has a button that will compile and program(flash) your PIC with one click (if you have the correct script installed). It starts the...
Yes I use it that way now.
I would like to use the programmer as I use the MEL USB unit and make it a one click use.
Once you go one click.... you don't want to go back...
Do you know if the...
I just installed a new PICkit2 and would like to know if the auto start and program will work.
When I select compile and program in the IDE, the programmer app starts but I have to manually grab the...
I just udated 4/08 from a new factory CD to ver 2.5a.
I now get the warning message on all code that uses the 18f252 processor.
"Warning(221) c:\pbp\18f252.inc 18 :invalid message number (230)"
...
I have a word var that represents a 4 or5 digit decimal number... (00000 or 01234 example)
I need to convert the var word to a string of 4 or 5 bytes that repsent the digits of the number.......
It is in a variable... not in EEprom or from a serial source.
Tcbcats
This is the task…
I have a number stored in a 16 bit word. The number is up to 5 digits like 01389.
I can also convert it to the format $30, $31, $33, $38, $39 in a 4 byte string. If needed. Each...
I need to setup 5 hardware PWM outputs on the PIC18F4680.
Has anyone set these up as dedicated outputs that run in the background?
I see the PB setup for HPWM 1, and 2 but not anything more that 2....
I need to interface with a MX829 Baseband Signal Processor that Has a MX-com "C-BUS" interface. This interface is a MX-com defined standard but I am told it may be compatable with some PICBASIC I/O...
I did not find the problem but did get the code working.
I was setting up the A to D with the direct registers and had the setup wrong.
I just changed the code to use the ADCIN command and all is...
PIC18F252 with HPWM on C2... 20 Mhz osc.
Using A0 and A1 as analog input with internal 5 volt ref.
Fixed low Z analog input for testing.
All power is stable
HPWM 1,{0 to 255},17000
As I...
Has anyone used the Atmel 4 megabit Data flash chip with PB Pro for data storage?
The part is AT45DB041B
2048 pages of 264 bytes each.
tcbcats
My question was about the 4800 baud receivers.
Did you speed up the PIC to PIC serial com path in order to have more time for processing the data from each listener?
I understand that the final...
NavMicroSystems,
Did you keep the RX PIC's output at the same 4800 baud or did you speed them up for sending the data to the combiner 16F or 18F PIC?
I was thinking of bumping it up to 9600 just...
I need to collect data from two serial sources and the data can arrive at the same time or multi byte offset from each source. These are GPS receivers at 4800 baud with little intercharacter byte...
I hope someone can give me some direction to do the following…
I have GPS NMEA position data that has the Lat and Lon in DDmm.mmmm format. That is, Degrees, minutes, tenths of minutes, hundredths of...
Thanks for the response....
I thought the code space was almost the same since I was only doing the pause and nothing else.
I'm not out of code space.... just needed to know if I was on the...
I have about 20 "PAUSE 20" calls in my program. If I change the code to do the pause with a gosub like this...
*******************
gosub time20
time20:
pause 20
return
******************
...
Check out our new development breadboard for the 18F252 and 452 series.
Our site is at http://www.geostarsystems.com
The products are designed to support MELabs PicBasic and use the new serial...