Here is some code in this link that looks like it will work for the USBDeviceState initialization.
http://mac.mf3x3.com/A_PIC_PROGS/USB_STUFF/USBDemo2_DT.txt
Also, here is some information on the...
Type: Posts; User: Cobra_Phil; Keyword(s):
Here is some code in this link that looks like it will work for the USBDeviceState initialization.
http://mac.mf3x3.com/A_PIC_PROGS/USB_STUFF/USBDemo2_DT.txt
Also, here is some information on the...
After further investigating the Windows 8.1 problem with the USB emulation, I came across this post....
Spoke a bit too soon. Works great in WinXP. Windows 8 is more stringent on USB devices and the current descriptor does not work. But it should be very close.
DaveC3,
Works like a charm. Thank you very much.
Ioannis,
I am specifically looking for PBP code that emulates a USB Keyboard. Unless I am missing it, I don't see that example in the link you posted. The link you posted has a descriptor file in...
Ioannis,
I have downloaded the code and examined it. The problem is every descriptor file is different. Even ones that state they are for HID USB Keyboards are different. Finding one the compiles...
Thanks Ioannis for the post. I have read through most of the thread. Descriptor files very so much from device to device and there is the old way of doing USB and the new way of doing USB it is hard...
I am definitely feeling the USB pain. I have spent the past 4 days scouring this site and the rest of the world for a working PBP example code of a HID USB Keyboard.
I have tried literally dozens...
I tried swapping the two lines and it did not make a difference. But, I have come to the conclusion I either have a faulty chip/board or the bootloader is not actually sending the program to the chip.
Thanks for the replies.
The problem is, I can't even get an LED to blink. Does not come on at all, much less blink.
Just trying to figure out the basics with this chip.
According to this chart,...
It's been a while since I programmed in PicBasic. I would like to get back into it. But I am struggling with the simplest of task.....blinking an LED. Spent 3 hours trying to figure out what I am...
I did not read the whole thread, but have you seen these yet?
http://www.sureelectronics.net/goods.php?id=1095
3[/URL]2x16 Red/Green LED's gives you three colors.
Very easy SPI interface. I have...
There is a KickStarter project going on here. It is a POV clock with a Microchip micro-controller:
http://www.kickstarter.com/projects/680714141/hard-drive-ticktock-pov-clock
I am working on a project to communicate to an automotive seat ECU. The ECU maintains the memory seat positions and uses the LIN bus protocol. I have purchased the Microchip APG LIN Serial analyzer,...
Here is a good link describing the wiring schemes.
http://www.infocellar.com/networks/new-tech/PoE/PoE.htm
I used this information to read floats from an AB plc and it worked fine. There is a subroutine for Int to Float.
http://melabs.com/resources/fp.htm
I have read all of the Microchip application notes (AN970, AN857, etc.), and scanned most of the R/C forums for existing examples of a 3-phase, brushless, sensorless motor controller that uses BEMF...
I worked on a project last year where I needed to send a GPS string using PDU mode. I received the GPS string, converted it to PDU mode, then instructed my phone via blue tooth to send the GPS...
Running 19200 baud from a 4 Mhz osc, isn't that kind of pushing it a bit?
If I change the interrupt to either INT_INT or RBC_INT and move the input to another pin, it works fine. CCP1_INT does not work. It has to be the simulator. I don't have a real 16F628A to test yet....
Sorry Bruce, didn't see the last portion of your post. I assumed since it worked for you, it was a problem with the simulator. The simulator does show .02v when the button is not pressed and the rest...
Thanks Bruce for the feedback. I'll try to figure out "Whats Up With That"...
Only wasted ~ 9 hours on it.....
I'm using version .93 Beta DT_INTS-14
and version 3.2 ReEnterPBP.
5.00v on Pin3
pushbutton