Thanks Richard,
Apart from that shortcoming, it works brilliantly with a PIC16.
My main aim was to maximise capabilities of the screen and secondly to gain attention to the observer as an alarm...
Type: Posts; User: wjsmarine; Keyword(s):
Thanks Richard,
Apart from that shortcoming, it works brilliantly with a PIC16.
My main aim was to maximise capabilities of the screen and secondly to gain attention to the observer as an alarm...
Hi All,
I see Richard's Include posts thread has been closed, hence my starting a new one on the subject.
Can anyone offer an example of Inverting sections (or the screen) for this handy LCD? ...
Hi Richard,
Okay, see below... The Inc file hasn't changed (attached previously).
If you "...i don't use pbp much these days" then I can't thank you enough for continuing to monitor and help...
Apologies for the late reply.
@tumbleweed
your mods got it working, many thanks for your advice.
@Richard
no joy using the ASM approach - the led locks up in the condition it was at the...
Hi Folks,
I was too quick in replying all was good - it isn't. The test I performed was only to see the serial Int! and then left it for more urgent tasks.
When I went back to do more testing...
Thank you gentlemen, that did the trick.
I'll make notes ready for the next time a new chip gives issues.
Kind regards,
Bill
Thanks Henrik,
I must have had a brain fart leaving that out... but its inclusion made no difference.
@ tumbleweed
I'm thinking you've nailed it - can you offer any suggestions to correct the...
Hi All,
First time using subject PIC and have it running well with all other tasks except no recognition of a button push via IOC.
The relevant section is below, taken from the main code (11k...
Hi All,
I have some sample 16F18015 chips with same dip8 footprint as 12F1840 I use a lot of, however the new one has larger program space and some nice features.
It currently is not...
Hi Richard,
Thanks for being there :). Yes I think so too but don't know how to enforce the borders. I'm really interested in using Portrait mode too to make text legible in a skinny rail...
Hi All,
I'm toying with two different GLCD's, one a 1.8" 160x128 (actually 2 of these but slightly different in overall size and connector with ST7735) and a 2.4" 320x240 with ILI9341, all TFT and...
Thanks gentlemen, all good information.
Of course the only real method of achieving success is to put the 'hands on' and work my way through it, it's a background task and will take time but I'm...
Thanks Mike, that's good advice but... I'm not an ASM or XC8 person which is why I use PBP and just made the upgrade purchase online (thanks Henrik).
My knowledge of C is very limited but if I...
Hi Henrik,
Thanks for the info, don't you EVER shut up - ramblings and all, your input is always welcome and appreciated.
I don't have 3.1 but this is the excuse I've been looking for to...
Hi Folks,
I have a project in mind that will combine 3 incoming serial streams into 1 which is then streamed via a 4G modem. All are 9600,8,n,1 with different start headers so can be identified...
Hi Tumbleweed,
You are a star, thank you.
I don't know how I missed that bit, correcting it saw the Opamp spring to life... in fact I tried a bunch of combinations with TRIS and ANSEL and it...
Hi Richard,
I knew you'd be the first to respond :)
I've been monitoring the output (pin 8) throughout the testing and it doesn't go above ground at any stage. Ultimately I want to process the...
Hi All,
The title says it all. I'm trying to utilize the PIC's internal opamp rather than a separate opamp to measure load current on AN6 but I cannot get it to work. I've RTFM so many times I...
Hi Richard,
I take your point however in my logging application I don't need a file system.
Presently data is being streamed via 4G and the planned logger will be there only to safeguard...
Hi Richard,
Thanks for your input.
I took a look at your TFT addin and it is heavy going for me to understand what's happening as most is in assembly. I'll try the code when my parts arrive...
Hi All,
I have some Microchip SST26VF064B (64Mbit Serial Flash) parts on order and, while I wait for their arrival, I'm wondering if any Forum users have experience using this family or similar...
No, 5v all the way unless the app calls for 3v3 (typically when I use a Nokia GLCD). In any case the PIC should be able to handle 3v3 at low speeds, surely?
The pcb has bunches of decoupling...
Hi All,
Just had a chance to try Mike's suggestion, terminal result below, still no good.
Power-on: 00011001 - 00011101
Priming PCON: 00011001 - 00011111
I'm Alive
Well, I found and tried another (new) 1788 but no difference. Fully isolating the programming cable and interface also made no difference, the fault persists.
I then went to a 16F886 and made...
Hi Richard,
I made a general purpose pcb a while ago for dil28 PICs that has breakouts for each pin and a 'shield' that sits over it for ease of changing displays (Nokia, 16x2, GLCD, etc). It has...