forget Proteus.
Also I think Henrik forgot to add the label Exit: just before the Serout command.
Ioannis
Type: Posts; User: Ioannis; Keyword(s):
forget Proteus.
Also I think Henrik forgot to add the label Exit: just before the Serout command.
Ioannis
What I read from that thread is that you do not have to worry about stealing your idea from pcb perspective.
And I never cared about that. Maybe because I use most of the cases, MCU on board and...
And I guess the higher infill the slowest process. Added to the more plastic usage, right?
Ioannis
Just saw this https://eu.store.bambulab.com/en-gr/products/a1
Although it has smaller printing area than Anycubic, it can color print and also has a nice feature for fuzzy printing, getting rid of...
Glad you got it working!
Beer accepted!
Ioannis
Wow, this is speedy!
Happy printing!
Ioannis
10% infill means that the compact pieces are not really compact inside?
Sorry, but I am at zero, regarding 3D printers.
Ioannis
Well, you do not have to tell them what you are doing. And after all, having a plastic thing printed there, what really means to them? They cannot figure what you are doing, right?
The $87.45 is...
Maybe here:
https://hdmi.org/requestform/clickrequestasync?docId=16
But you have to register in order to be allowed access.
Ioannis
Are you sure the settings of the internal registers are the same on all you modules?
Can you check/verify that?
Also, power supply should be capable to withstand the peak currents of the...
Either one character or million of characters, the RS-232 sends each character alone. It has start bit, stop bit, maybe a parity bit too and the data itself. So, if between characters, there is small...
Well, OK with the self 3D printing for one or two pcs. But is it cost effective for small production?
What about using JLCPCB 3d capabilities? https://jlc3dp.com/?source=JLCPCB-top-productbar...
Never thought of that, printing to an angle so it can fit in the area!
I like this thread more and more!
Ioannis
The command send all at once. No commas are inserted if you do not explicitly define so.
The command will send the text string and immediately after that will send the MyValue not as one binary...
Thanks for the info.
Ioannis
With resin you need a mold I guess.
But with laser cut acrylic sheet, the pipe may not be cylindrical, or is it?
Ioannis
One second in the ISR is counted as 16.384*62=1.015808
Every minute is 60*1.015808=60.94848 so it is indeed about 50-56 seconds faster.
Why not use the TMR0 as 16 bit timer, no prescaler. After...
The command serout2 PORTB.1, 84, ["This is my value:", dec MyValue, 13,10] is valid and you can use it.
Also same goes for Hserin too.
I may have not understood your problem.
Ioannis
It is really amazing what you can do with a relatively cheap machine these days! Endless possibilities.
I suppose the LED is between 4th and 5th button, right? Can you 3D print transparent...
Well, from the datasheet I could not understand much about how to read data from the chip.
What are the $0F and $0E after $36 in your commands?
Also, are you sure you have connected correctly...
Whatever you choose for the prototype, it needs a lot of time.
At least with 3D you have freedom to do anything you like.
Keep on!
Ioannis
At this size, maybe wood is an option for the prototype?
I saw Smooth-On silicon which is very exciting! But for an enclosure too much of work I guess.
Ioannis
That is great! Nice choice.
What enclosure are thinking to make?
Ioannis
The base of the transistor is grounded through R6. The other end of R6 is Vss, meaning ground.
To Reset the system you have to feed high to the transistor in this circuit.
I am a bit worry...
Indeed Henrik. You are absolutely right!
Now I recall I had the same issue once and instead of loose my time trying to find the strange error, i went off to a state machine logic and kept my...