Search:

It is OK, that jumps to that label.
This sequence "+UUSORD: ",44 never arrive. All characters must be in sequence for single wait instruction.

You can do it like this
arrayread BufferTemp...

Use HIL to PS/2 converter. Then send data from pic using PS/2 protocol. I think you have example on somewhere forum.
As far as I know HIL use dedicated IC for interfacing device MCU to HIL Bus.

Yes there is file. You can edit it. There is example on forum cale LCD-AnyPIn, or something like that. But always have backup if you edit it.
You can find it in few places.
in PBP3 instalation...

Just create lookup table, with linear interpolation.
I found it to be simplest and fastest way.
I successfully created this function https://en.wikipedia.org/wiki/Mean_kinetic_temperature (second...

Look up DIG. It isolates single digit, as you need it, without IF...

Sorry for that...

You got most of circuit. I added one more buffer, so input to rest of circuit is low impedance. If you know your sensor output, you can omit first buffer.
Second OPAMP create comparator with...

If you use your signal for regulation of something, ADC/DAC solution act like first order hold
https://en.wikipedia.org/wiki/First-order_hold
And it can cause instability in regulation.
So my...

You can read address, without searching, if it is only one device present at bus. Just write command $33, and collect next 64bit. Do this 3 time, one for each sensor.
Connect all DS to bus.
Write...

You just add one device at time. And search after you add one.

Look at command set:
https://www.itead.cc/wiki/Serial_Port_Bluetooth_Module_(Master/Slave)_:_HC-05
Be aware that there is several fw for HC-05. I have build programmer for them that worked on...

Can you display raw register data?
So you can compare result of your calculation with register value. Maybe sensor have some drift issues.

That would be most reliable way to go.
Also you can call every ms something like this:

Hserin 2,NoData,[WAIT(13,10),STR RecBuffer\100\10]
This will capture date betwen two CRLF, and modem send...

It support GSM and GPRS. So no 3 or 4g.

You could just goto error handler if you found error. Then make just one exit of it, and exit with @ Reset.
This will reset PIC and clear stack. Same way as if you power off then on.

When compiler gosub, it will always return. Unless you use ISR to modify stack, which I wouldn't recommend.

Not necessarlly, Lot of hi level programing language have this already implemented. eg in .net: On Error GoTo, Try, catch, etc...
Same could be done for HW. If something external happened then you...

But if I understand correctly he want to goto and never return.
So you need to pop stack to prevent overflow.

Maybe this will help
8797

I had similar ideas, but give up on them. I use something like this:

Gosub xx : If err=1 then goto yy

XX:
if something to triger going to err sub then
err=1 ' goto in different sub after...

You missed the point...
Use same RC circuit to drive APA LED. Apa have Data and Clock pin and you have one pin free.

Not necessary, you can create clock and data using only one pin.
eg
https://www.romanblack.com/shift1.htm

You need _ before PBP name, when used in ASM.

Then declare variable in BANKA. And use it.
I have one of best compilers for pic. It iscalled PicBasic Pro :)
And pbp have very good optimization. And wouln't benefit in program size from adding...

I use TmpB1... TmpW1... TmpL1 etc...
Passing values to sub cant make nothing for better code efficiently.
It can make it just look better. Behind curtain, ASM code is same, or worse if compiler...