Search:

Well, I think I got what I need.
I have been tweaking the options and have found that if I use MPASM I can get two more byte variables! So total including commandeering the OSCCAL register is 4 byte...

Here's the code that I'm working with.



@ Device PIC10F222, IOFSCS_8MHZ, MCPU_OFF, WDT_OFF, PROTECT_OFF, MCLR_OFF


OPTION_REG = %11010010 'GPWU_OFF, GPPU_OFF, TOCS_OFF, TOSC_HIGH>LOW,...

Hi,
Got that 10F ZIF adapter. I had also thrown together an ICSP setup on my breadboard. Both work! Iʻd rather use the ZIF, and free up the breadboard!

SO, after getting a good test running, I...

holy crow.
i was planning on setting up a breadboard to do ICSP on the thing... i'll still give that a go, while i'm waiting for my shipment from meLabs!
i have used the 12F parts [8 pin] with the...

have tried a couple of things and they are funny.

i compiled some code that i'm currently using on a 16F88 and it programmed correctly.
i tried to program the 16F88 with the code written for the...

tried prying up the Vdd and Vss pins and giving them separate power during programming. same error at 0000.
noticed that the DIP and SOIC versions have the Data and Clock pins in different...

Hello.
been around the thread alot today. almost all of the posts in regard to this issue have to do with the EPIC serial programmer. I'm using the USB programmer. difference no?.
i tried many...

Hello,

I've just started working with the 10F222, and haven't been able to get anywhere due to a 'Code Programming Error at 0000'. I've poked around on the threads and found a couple of...

bruce, thanks for the reply,

i may try to put an NPN on OSC2 to see what's up. but i'm more interested in controlling the PWM driver.

i have the PIC connected to the TLC PWM driver, and it's...

yes it's a duplicate.
but it seems that everyone is hanging out in the PBP room, and it's a PBP problem. it was miss-posted over there.
have had a chance to connect to the TLC5940 and it is not...

hi-ho,

had this posted on the PicBasic side. it's lonely there.
i'd like to get the PIC to control a TLC5940 PWM controller for LEDs and whatnot. i have a grip on how the chip works, and how to...

hi-ho,

been bouncing around. i'd like to get the PIC to control a TLC5940 PWM controller for LEDs and whatnot. i have a grip on how the chip works, and how to format the data to its registers, but...

didn't see your reply skimask.
after the quote i made, the error is listed as some low level barf.
check the link below for a good example. it would give different barf sometimes.
i hope i'm on...

ok just uploaded the most recent version of microcode.
so far, so good. no errors reporting. hope that was it.
feeling better. dumb, but better.

anyone have this error come up in MicroCode Studio?
"the NTDM CPU has encountered an illegal instruction..."

is there a fix for it? it mostly goes away if i restart the computer, but then it...

haven't been by in a while. i'm working on about 4 different things right now, but life is good, even though life with electronics is slow. i would read a book on time management if i could find the...

ok, i'm getting a handle on the interrupt handler. the DT_INTS is very powerful!

i'm not sure if i can use it, because my hardware USART is located on a port that i'm dedicating to parallel...

hi joe,

finally got a chance to get through that thread. sounds like you got your project to work in a few different ways.

i'm not jazzed on using interrupts in my project because i may be...

hello fellows,

i've got a general question and comment that i hope generates some discussion. how the heck do you make sure that you don't miss a serial signal when you are using UART? sure, each...

hi,

i have some details of the conveyor system that i'm operating.
first the fun stuff:
go here for pictures and video http://solutions.joelmurphy.net
click on Phoebe Washburn to get there....

Thanks muchos.
i have a large cap across the rails, and a small one too, [.1uF]. i teach basic electronics and PIC programming at Parsons, and have been over and over the importance of placing...

Hello Helpful Friends,

A while back I posted a problem that I was having with my PIC application.
here's the thread if you want to catch up...

someone has beat you to it
http://beer.trash.net/index.php

a sidebar on the forum would be nice though. options could include: rotten eggs, tomatoes, a board with a nail in it...

So, if it's...

I've played around with the ISD series a bit for a client. They are amazing chips, but the audio quality is not so good if you get it right out of the can. Filtering is crucial. A good source for...

There's a reason why I gathered you all here today...

I have to hand it to Jerson. The BrownOutTimer killed my resetting problem.
Also, props to Darrel for bringing up the Status bits. That was...