Try this:
if Z.15 = 1 then
Z = 0
endif
Type: Posts; User: Dick Ivers; Keyword(s):
Try this:
if Z.15 = 1 then
Z = 0
endif
Henrick …. I tried the executable you suggested but it didn't lead to a useable result. Perhaps something else is needed ??
In any case I don't want to spend more time working on the snap...
Final summary on the Snap programmer:
1. The programmer works well when using MPLAB X IPE as long you have the latest version (5.30) running. (Thanks Henrick)
2. The device does not work under...
You may need to update your PK2DeviceFile.dat
Try this patch:
Patch the C:Program FilesMicrochipPICkit 2 v2PK2DeviceFile.dat with following file: http://www.piccircuit.com/ins/PK2DeviceFile.dat
Update: All the programming functions are now working when I use the Snap programmer from MPLAB x IPE v5.30. I found that the Snap device must be run from the Advanced Mode in order to view the...
Yes, I now have MPLAB X IPE version 5.30 installed and there is some progress. The Snap programmer is now recognized and my connected PIC device is correctly identified. However, I have more work to...
Hi,
I picked up one of these low cost programmers at the current 50% discount offer price from microchipDIRECT making the part extremely cheap. Now trying to get it to work and could use some help....
Use the ^ operator for Bitwise Exclusive OR
ByteA = ByteA ^ %11111111 Inverts the bits of ByteA
Where is there a list of the new features in PBP 3.1? I would like to know if it's worth buying.
I also use LORA modules for most projects. They utilize a SPI interface to the microprocessor. Not sure this meets your definition of transparent but they work fine.
I have also used wireless...
PIC 12F1822 has FVRs and eveyrthing else you need.
You may want to consider the RFM95W radio module. It is a LoRa, long range transceiver using spread spectrum modulation. You can easily get the range you are looking for. Works best at low data...
Hi again,
I'm taking a stab at a possible solution to my own problem:
Of course there cannot be two interrupt handlers. So, within the single handler a test could be made to determine which of...
Hi,
I have one interrupt working but now would like to enable a second. The first one is a Timer2 match interrupt. The Pic is a 16f1829. I use other Pics in this same family as well. They all...
I must be missing something regarding the discussion of the benefit of using a Schottky diode in this application. From a reading of the PIC data sheet the maximum pin input voltage for the low state...
Charlies's approach sounds good. Would it not be wise to use a Schottky diode to keep the low input to the PIC as low as possible?
Another approach is to enable/disable the hardware port in your program. For the 16f1826 I use RCSTA.7 = 0 to disable the port when I'm done using it.
Henrick,
You're right that terminals can be configured differently. I'm using TeraTermPro and Hyperterm VT100 terminals. Both are configured for the lines to end with a CR. Agreed that it would be...
Henrick,
You are quite correct, there is no need to employ arrraywrite to get the desired result. I tried your new code and it works. Also, I don't think there is a need to test for the presence of...
Henrick,
I got your idea to work using a modification to your code. I need do do more testing, but it seems solid. The modified code is as follows:
i VAR BYTE
Value VAR WORD
...
Henrick,
Thanks.... your suggestion to use the ARRAYREAD function to parse the incoming strings I think will work, and is a good idea. I didn't know about that command until now. However, I can't...
Hi,
I have a list of variables stored in eeprom. In the code example below there are four variables shown but in the final program there will be eight.
I have working code will allows each of the...
Henrick,
Yep, I missed it, but's clear as day on page 405 of the data sheet. Thanks for your speedy reply.
Dick
I've searched the data sheets high and low and cannot find the answer to this question:
What is the "T" designation, e.g. what is the difference between a 16F1827 and a 16F1827T ?
Hi Tekart,
Do you have PBP3 ? I believe you will need it to use the 12F1822 or any xxF1xxx part.