[QUOTE=Ioannis;144615]Not clear what you mean.
Ioannis,
I'm missing the minutes on the first LED dsp... :o
Type: Posts; User: Gevo; Keyword(s):
[QUOTE=Ioannis;144615]Not clear what you mean.
Ioannis,
I'm missing the minutes on the first LED dsp... :o
I have make this !
This serial display receives every seconds data, 1200 baud of an other PIC
I'm trying to convert this seconds (0 to 9999) into Minutes, Seconds... on the LED display.
But, i'm missing the...
Hi Ioannis,
I'm in located in Netherland and the LoRa network is here on 868MHz.
@ MichelJasmin, would you share some BASIC code ? I still working on a LoRa 868MHz (RN2483) portable signal strength indication.
Hi Scampy,
I cut and paste the settings at the start of the code, change _FOSC_HS_1H to _FOSC_INTIO67_1H to get RA6 and RA7 as I/O en compile without error's.
The LED is flashing now and the...
Hello Scampy, thanks for the workout.
I have comment out the four line's in the .INC file (PBP folder)
I have add the line's to PBP main code and get errors after compiling. (PBP v2.60C)
4...
Hi Dave,
Thanks for your input. This give errors for PBP Pro...
error (122) Illegal opcode (_CONFIG1H)
error (122) Illegal opcode (_CONFIG2H)
error (122) Illegal opcode (_CONFIG3H)
error...
I have update MPLAB IDE to v8.92
So, MPASM is now v5.51
I think this is the last version of MPLAB IDE
Hi George,
PBP 2.60C
MicroCode Studio 3.0.0.5
MPASM ? I have MPLAB IDE v8.84
Thanks Dave,
A lott of errors. like:
(,) illegal character
(_CONFIG1H) illegal opcode
(_CONFIG2H) illegal opcode
(_CONFIG3H) illegal opcode
(_CONFIG4L) illegal opcode
Hi Dave,
This my program.
Hi Dave,
You right about the OSCCON. I set this to %01100000 for 8MHz. speed.
I try to change INTOSCIO but no LED flashing...
Hi every one,
On a older application with the 18F25K20 I need some more I/O. So, I remove the crystal to get RA6 and RA7 available.
Now I want to switch to the internal osc and try this working...
I'm using this script for up to 2 months and it works fine. Nice tool for programming in BASIC without using MPLAB.
Hello,
I try again.
No body here any experience with the Atmel Touch AT42CT2120 controller with I2C ?
The controller supports Slider, Wheel functions and up to 12 cap channels.
Hello,
Anyone testing or working with the new Atmel touch sensor IC ?
Hi Henrik,
If have take a look on by PC. The file name is ctrllib.bas (Graphic library of subroutines for use with a Toshiba T6963C, incl Windows GLCD Tools adn Image Converter).
And I have pay...
Hi Henrik,
A couple years ago I make a controller for a th AlphaVibe a medical vibration Vibe. The LCD is Winstar 240x128. (Toshiba T6963C) The complete firmware is in PICBASIC. Incl. de smardcard...
Well, here's the Ami18 Board, full Amicus18 compatible.
http://www.picbasic.co.uk/forum/images/misc/pencil.png5728
Hi Dave,
My again.
Arduino (Atmel) and Amicus18 (PIC) are different platforms. The board and shields are outline the same. Not electrical.
You can update a Amicus18 board (or clone like...
Hello Dave,
I know the Xino Atmel of Ciseco in the UK. But, we a Authorized Microchip Design Partner, so we stay by the PICmicro's :-) And I can tell you, there is a lot news in the World of the...
Hello Dave,
Here you have a point of discussion. The Arduino is a 5-volt based Atmel. The Amicus18 (PIC18F25K20) 3V3. But, the free Proton Compiler is also support (version 1.0.1.6) the...
Hello,
Maybe someting with a magnetic (Murata AS-M15TAN-R) sensor ? This give you a 5-volt low/high signal when detect a magenetic field.
Regards,
/ Gevo
Hello Dave,
Why not a PIC based board ?
With the free Proton Compiler or with MELabs PIC Basic.
Works well.
Gevo