Search:

Hi Phil,

This last code is perfect!!!

Thank you again for your attention and partnership my friend. If I can help, please contact me.

7071

Regards,

Hello, I tested the Phil code is ok, very good code. I changed the Phil code to not shifting number on display because the original code is shifting when increase any number. On below code is the new...

Hi, Phil. Very thank you for your attention, I hope repay soon by your attention, job and professionalism. Now, I will work around your code and post here any change or improvement I can do.

I...

Hi, I blink a led and is worked normally. In other words, my main program is ok! I think this display problem is clock, I think is very fast for the TM1640 display controler. I will try with other...

Hi HenrikOlsson,

Thank you by your contribution.


Regards,

Hi, my project has a LED. I use TOGGLE command in MAIN route and not has problem, the LED blink normally. In other words, the communication PIC is worked.


Regards,

Hi, This "Define RESET_ORG 800h" line is used for Microchip USB bootloader.

Regards,

Hi Norm, I tried this new change but not worked.

Regards,

Hi Norm, I will change this your tips and return.

Hi Phil,

I used this code on my test. When possible try this so.


'****************************************************************
'* Name : LKM1640.BAS ...

7053

7055

7054

Hi Dave Purola,

I tried set this but nothing happens, I need buy other display for sure if my is good or no I think my display is bad, I don't have sure.

Thank you for your attention.

Hi Phil,

I tried buy other display on dx.com but is sold out. Where you buy? Do you have an PIC18F with clock 48Mhz famile for make this new test ?

Regards,

Exact, I've use Bootloader with 48MHz. I have the Datasheet. I'll try with 16F628A and return.

The datasheet file:

http://www.micro4you.com/files/sensor/DHT11.pdf

I compiled this code into 18F2550 but not worked, someone know change this code for 18F2550 ?

This code is to PIC16F84, I changed the pins configuration to 18F2550 but worked.

...

I continuous search article about this Display (TM1640) on internet, if find any thing about this device, I post he!

Hello, Sherbrook.

I made change below but yet not works. I will buy another display, I thing this display is wrong, but I don't have sure.

...

Hellow Sherbrook, I will try to this your code and give news.

This is circuit diagram.

7036

[QUOTE=jefrem;121502]Possible is programing TM1640 Display with PicBasic Pro? How???


I have this code, but does not work. Someone can help me?
...

Hellow AvionicsMaster1, thank you for your atencion.

So, when write this code in my PIC18F2550 nothing happens. Nothing display lights. I've tried other programs but nothing happens.

Below has...

Possible is programing TM1640 Display with PicBasic Pro? How???


I have this code, but does not work. Someone can help me?

'****************************************************************
'*...

With use 4 mecanic rotary encoder with this code (pic18f4550) ?