Search:

I did that, now my main problem is counting backwards......problem is if I count backward evrytime secounds passes 59 to 00 minute raises for 1, same happend if I go backward, but if should decrese
...

Hello!

I've have one thing to do, but my experiance is low in this area.....this is the deal, I have two pulses comming from electronic that is allready excist, when pulse A is comming I should...

Did you try this code with mechanical encoder, or normal optical encoder?

Thanks for help guys!

This laste if and is important, because of tolerance on POT and so, is better to ahve some more dead time between forward and reverse! Will try this and let you know how it...

I want to use 16F628 or 16F877 analog input which will get signal from potentiometer. Output should be 2 pins, one for each direction of PWM to drive H bridge. So, when we having potmeter in center...

HI to all!

I did worked with microcode studio and pbp allready, there was some time I didn't and now would like to get back to it again....

So I did take my PIC16F877, programmer and go to...

I want to start post about code for PIC uP (16F877) which would send data via I2C bus for programming TSA5511/5512 PLL IC, and frequency reading on LCD, and it will be suitable for 87 - 108MHz range,...

Actually all this codes have step size of 125KHz....and we here want to do a 100KHz step size....

So fisti thing to do with TSA is to change quartz to 3,2MHz because then it can be programed with...

Also,.,,,,whats // means?

HI....I try but that i only get 0,4 steps.......


F3 = 100*(F1//8) with this code I've got steps with 0,1 but when come to 0,7 directly jump to 0????

I've set this code to work from 87 to 108 MHz......but I have problem:

When I press UP it goes ok from 87,0 87,1 87,2 87,3 87,4 87,5 87,6 87,7 and thjen jumps directly to 88?????? And whole time...

Hello Jerson!!!

Thanks for work!

But i have smaller errors about it, if You please can explain I doing something wrong or?

regards!

Hello Savnik!

I try to send You PM but You didn't answer.....I'm working on same thing and I saw that You have found some code fro TSA but on upper band....

Did You try something to do with it...

I downloaded code many times and always same problem remaining!

Mecanique Micro Code Studio Plus
Version 2.2.1.1
Compiler Version is PicBasic Pro 2.30


Yes....and MPASM is checked in...

I did install MPASM and when I buil other code it works perfect and MPASM window pops up while compiling......so I think that's ok....

Gonna try reinstall PICBASIC OR mpasM AND GONNA SEE.....

The problem is I don't have LST file......Ionly have LST file for code which is corectly assembled...for this no...when I try to assembled it it give me errors and stops.,

And this is screenshot i...

NOW, I download latest version of microcode studio and I'm using MPASM...and still have same problem....

With other mine code MPASM works great without any mistake.....but when I try to put bar...

GOnna go to MPLAB now.....

Can somebody explain me using MPSAM with mine MicroCode Stuio PicBasic Pro?

With that I still gona write code in code studio or?

OK!

Joe, is they any way to this be compiled in PM with some changes in .INCLUDE file?

Hello!

I've try to get some bar from this and I've got problem as usual ;-)


So this is little code from me:
INCLUDE "LCDbar_INC.bas" ' Include the BARgraph routines


DEFINE...

Hello Shokre,,,,

Got problem...when I try to compile You're code, I've got error "bad expression" in every line where if IF command....do you know why?

I use Micro code PicBasic Pro compiler.
...

Joe, Dave....thanks!!

Problem wasm't with code.....it was with dead contrast pot.....can't velive...I buy it new...

Now is working good!

So....I probably gonna put more questions here about...

OK, gonna find pot and put it now.....but I saw that nobody comments mine code....do you think is OK now?

HI Joe! Thanks for replay.....but still I have dead LCD :-(

That I wrote is whole mine code....this is code now:

DEFINE OSC 4 ' for 4 mhz osc
TRISA = %00001111 ' the ones stand for...

Dave, thanks for replay!

I know for that contract....I didn't have pot so i put two 10K resistor in seria and getting contrast V from middle...something about 2,5V!

Is it this OK?