Search:

Ah, call it the joy of electronics!

Hi Danny

I have mine powered from the 5 volt supply through 2 diodes
these drop the voltage by about 0.6v each, works fine like this.

Regards

Tony

Hi Daniel

Using these modules is the same as communicating between two pics if there was a wire connecting them.

Below is the code the sending module is attached to, I have removed all...

Hey

Really appreciate the suggestions, i've been using the Parallax DAQ with Excel now for the last week and it is exactly what I was looking for.

Regards

Tony

Hi

I'm just wondering if anybody can recommend any free or lowcost Data loggers that can send serial data received via RS232 to MS Excel in real time for logging and graphing purposes.

Thanks
...

Correct, I wasnt aware of this....but now I know! :-)

Cheers

Luciano's analysis of the modules is 100% by the way.

Tony

Hi Pedro

The modules I used were cheap as chips and I have found them quite reliable...I would reccommend them all the way, the instructions are crap but the comments above are completely accurate...

That's the one alright!

Thanks for all the input.
I have managed to get these working, they will only work when the baud rate is set to 19200 and the DEFINE HSER_TXSTA must be set to 24h when...

Hey cheers for the reply.

Sorry for not posting the data sheet. I thought it was more of a general question assuming most RF module opperate in a semi similier manner. As for the make and model,...

Hey

I have 2 wireless RF Transceivers. The datasheet states that the baud rate is 19200 and that it is customizable. It mentions nothing about how to change it.

What i'm unsure about is if...

Ok I lied about leaving it until tomorrow.... I just couldnt leave things alone! Anyway its all working now, I think it was just the polarity that was wrong.

Tony

Hey Ski...No never, dont think i'll be leaving PBP any time soon although I have been cheating a little with Mikroe Basic!

I think your referring to a copy of PBP I sold a while back I bought 2 at...

Hi All

I'm at the moment setting up A 16F88 to communicate with my pc's serial com port. My issue is with the many circuits I have seen and the way in which to wire up the MAX232 converter. ...

Thanks Skimask for that, workin fine now.

Cheser cheers for you reply also. I was looking at the SHT11 data sheet the other day and if I remember it mentioned limiting the amount of queries sent...

Hi

I think ive got most of the fuses converted so MCS can read them. The onlyone thats not working for me is the fuse for the Oscillator switchover. I have the following

@ DEVICE IESO_OFF
...

Thanks for posting this code, Im just playing around with it now trying to get it to work. Can you tell me what chip this code will run on as is? Ive tried compiling it with MicroCode but it is...

Hey All

Is anyone familier with a component that can be used as the tx rx filter on the TPIN+/TPIN- and TPOUT+/TPOUT- pins of the ENC28J60, There is a diagram on page 9 of the data sheet.

Its a...

Lol, you guys are gas!

Hey Skimask

I care because its relevant to something I am working on now.... To find the perfect thread....only to discover you have been led up the garden path, haha. Not to worry, I did see a...

Hmmmm. This was a valid interesting topic.... pity it ends in the middle of nowhere without a solution!

Hi Amgen

I would like to try this, sounds perfect for what i'm working on at the minute.

Best Regards

Tony.

email is Picbasic forum username @hotmail.com :-)

I appreciate the response guys, thanks.

Tony

Hi

I am looking to buy an new laptop in the next week or two. Ideally I want it to have a serial port, but, as usual, the ones I want to buy dont have serial ports. I really dont want to choose...

Thanks for all that Brian

I may need to pick your brains again when I really get into the thick of it! I doubt i'll need a cooler built in as the surrounding temperature will never be above the...