I dunno OSCTUNE, but modifying the .INC file usually work for me
You have 2 choices for PPL, but I think if you use 4mhz it would be "normal" speed.
here is my config for a 18F2550, using...
Type: Posts; User: flipper_md; Keyword(s):
I dunno OSCTUNE, but modifying the .INC file usually work for me
You have 2 choices for PPL, but I think if you use 4mhz it would be "normal" speed.
here is my config for a 18F2550, using...
disabling all other interrupts was done assuming that after exiting the current INT routine, no other interrupt would occur except RX_INT...
the thing that bother me is that once wheel speed is...
with a 20Mhz xtal, I had a PIC with DEBUG @ 115K to send data from memory to PC serial com port, and it would have 1 or 2% error rate.
that wasn't that bad, since it was after a few minutes of...
Hello
I have a pretty fast timer(1) running to draw graphics(POV), interrupt about every 1msec on a 48Mhz PIC (18F2550).
I'd like to be able to change some parameters while this run, but so far I...
I've moved to a simple 12F683 to drive the chip and I could get readings, but nothing valid as for results
now with your suggestion it seems to be getting better!
well at least for the pressure...
could be many things...
sometimes I have issue that my MPlab forgot that I want to use power from my ICD2 during programming.
I have to go back in settings, power tab, and re-check the option.
You...
Hi all
got that sensor for a while an I taught it would be nice to plug and play with it, but it's not behaving nice to me so far.
After a long read of the spec sheet, I came up with the...
updated version with some more control is now available
http://www.flipperdesign.com/BeepMaster2010grid.rar
don't be afraid to Right Click over grids and buttons, they will often reveal magic...
on the power topic, I've read that most current electric R/C plane systems uses a BEC to run all servos/receiver from the main battery pack(Mostly LiPo these days).
BEC usually have a safety...
that is correct
It's the first time I come accross this but the 16f876a drive those ANalog ports with ADCON and other registers
thanks
this is great!
I'm not too sure to understand how you get the Decimal values when reading as STR and then displaying them as HEX2?
also, a bit out of topic but I get a weird error:
symbol not...
good!
check back on my website(scroll way down), as I updated some information about midi stuff.
If you have other question on un-explained stuff just ask, I will try to update the info.
DS
thanks for reporting this error Glenn
I believe you have pinpoint the bug. my programming didn't checked for coma or point separator.
Now it will update the frequency list at startup, after...
updated program recently, some added functions and checks.
and created a new utility to process midi files for import(work ok with clean tracks, ie no multi-tones as the pic can't do that)
...
Hi Dennis
I'm not too sure on how things would get hooked between light sensor/program/ and another pic making sound?, but if you can describe the loop I might check into it.
I would hope to...
agreed that possibilities are totally endless :)
I already hooked a frequency bargraph on my board right aside, since I needed a frequency analyser to catch the sounds emitted by the pic in the...
You can now re-download from the same link, and a newer version is there. Look in the top right corner options if you can't see the interface.
try barbie pink interface!! :D it's NIce
also...
a quick note to let you know that there is a visual bug under any OS that is set to use the fancy windows themes, like rounded buttons and fades...
to get things right, you new to switch into...
ok, i'm tuned now. where to??? :D
I must say I did tried running at higher speed and from the experiments, I concluded that 19,2 kBaud was about the fastest I could run without troubles.
57K...
any PIC will do
it just we to wait for the correct data to come in, which is set by the sending program.
the only real important part is here:
waitforkeydata:
pause 1
DEBUGIN [WAIT("DT")]
Salut Alain
oh, no keys appearing?
could you send a snapshot of what it looks like on your PC?
flipperdesign at gmail ... dot
this is hard to imagine as i'm forcing colors...but will check...
Ok, here's one little thing I came to spend time on and turned out to be quite funny, so for the musician, here you go:
I wanted an easy-er way to create tunes with the sound command, else than...
very interres-thing!
thanks much for this Al
So it means goto's are safe inside a gosub, as long as there is a return in the end. I like that!
well, I believe as you suggest that it's ok to break a While loop...
but what's tickle me is the GOTO timeout of Hserin, he would break out of a GoSub.
If it's really a GOTO, there must not be...
Oh, thanks for that!
I wonder actually, how that "WHILE" would react since HSerin is doing a GOTO somewhere else.
Either that loop automatically get closed or it create a bug...
I guess I...