OK. I know this may sound stupid but how fast will the drum turn if you took the pulley off the motor shaft? There may be enough grab to turn the drum belt from the shaft alone but you should...
Type: Posts; User: AvionicsMaster1; Keyword(s):
OK. I know this may sound stupid but how fast will the drum turn if you took the pulley off the motor shaft? There may be enough grab to turn the drum belt from the shaft alone but you should...
Can you weld? If yes you can add an idler pulley to slow the rotation. You'd still have to do the math as to what size pulleys you'll need but it could be done. I don't know if you'd be able to do...
I'm really just a dabbler but does that mean I should quit using PBP and learn a new language? If PBP isn't getting supported is it worth using it in projects?
Swap a few leads or lines of code to switch SSR and retest.
Do you have the same heaters on all channels? It doesn't appear the SSR has internal protection but channel 1 may be cycling if...
Try longer pauses.
I can't find a data sheet for a 16F6218a.
It would be nice if there were and option when you compiled a program MCS would compile a one up version and display it in the filename.
That could create more confusion but for me it would...
Just curious if the symptoms change when the RPM is varied?
Henrik, for my edification is this the correct answer? Please don't roll your eyes too far if this is too much of a NOOB question.
IF SWITCH = 1 checks to see if SWITCH is set to ON
IF SWITCH...
ADCON0= %00000000 among other things doesn't turn on the ADC.
More code and a schematic if that doesn't help.
Have you tried making it a long variable? Those are signed and I assume can be stored in an array.
If you insist on using an external oscillator/resonator/crystal there are some examples of how to hook it up in the datasheet on page 33.
However, most people would be glad to use the internal...
Just guessing here but the spacing after noclockout might not recognize the ampersand and therefore the mclre_off config. Could it be that easy?
Probably a stupid question but in the following lines temperature is broken into a lowbyte and highbyte. Assuming you've got temperature defined as a WORD, does PBP automatically meld these two...
So Google translate is failing me but if you're still using the code from post #1 and using a 16f883 you need to set the OSCCON and maybe the CONFIG1 register. Telling PBP3 to interpret the code at...
Well I don't have Proteus so I can't look at your simulation. However define lcd_lines 2 needs to be define LCD_LINES 2. Define can be anything but just like all your other lcd stuff the define...
Well, I don't see a chip number in there anywhere and a schematic would be nice. Would be good also if you gave the part number of the display.
I've yet to see the oscillator set using define...
Yes I made a mistake. There is a difference between bitwise operations and logical operations. I vehemently apologize for the second part of my post.
Depending on the keyboard the | character doesn't look like it on your keyboard. Never could figure out why they do this but it's above the ENTER key and is accessed by using SHIFT and the \ key. ...
Couple of things. In your schematic I don't see any current limiting resistors at each pin. They are necessary. When defining the oscillator speed osc needs to be OSC. I think the spaces in your...
Maybe this will answer your question. I got it from http://www.electronics-tutorials.ws/accircuits/rms-voltage.html
The term “RMS” stands for “Root-Mean-Squared”. Most books define this as the...
Though I doubt it, European phones may be different than in the USA but here in the USA only two wires, a pair, are needed for a phone to work.
The other pair at one time was used for...
For what it's worth, and I'm probably wrong but, I don't think your worry about the opto is properly directed. I think the concern should be placed on the PIC. If you don't have the flyback diode...
Just spit balling,
Did you make portc.0 digital? I'm thinking you might need that logic level.
You might try swapping resetvfd=x values and/or adding a longer delay. Seems it's only out of reset...
I never have this problem. Box stays compact until down arrow is clicked.
They/them/those must not like you. Aren't you being moderated? What did you do to deserve these aggravations?