I guess I don't know how to pm..lol
Type: Posts; User: dbachman; Keyword(s):
I guess I don't know how to pm..lol
What is the chance you could email me a copy?
Ok Richard Thank you but it looks like meconfig is not anywhere.. at least I couldn't find it to download..I will keep looking but ME labs has a posting that is discontinued and end of life....
Soif I was using an internal oscillator, I would define it in Config1h and further in OSCCON?
Well that worked fine.....
Well the board has a crystal hook up but can be strapped in and out.
I did try just the define osc 32 with my config and it also worked...
as you probably surmised, I...
Richard,
This code is written in Mikro Basic I think and works...I was trying to convert it to PicBasic..
Below it I have pasted the Config file that goes with it..
' *
' * Project name:
'...
Hi Richard,
I am using an 8mhz ext. crystal..
Hi,
I have tried everything I can think of to get this to work...anybody got any ideas what I am doing wrong or a missed setting?
Thanks Don
@ __CONFIG _CONFIG1H, _IESO_OFF_1H &...
Thanks Richard, Got it working......
I don't know if that is the proper title but this is what I need to do...
I have two ADC values and they basically are never equal. What I want to be able to do is when the values are within a...
I guess that was it...the pullup resistor on the input...apparently it was floating...
I am using an 18f2550.....
Norm...I don't think I am experienced enough to use that debug code...
I have looked back at some other code I have written and have used while/wend the same way.....
this is the code..
Trisa = 1
Trisb = %00100000
portb = 0
while portb.5 = 1
wend
high portb.4
Right.... while pin 2 is at a high state shouldn't the program stay in the while/wend loop until it goes low and then jump out and turn on the LED?
I have been trying for a while to get this simple code to work. Can someone tell me why it won't?
Thanks, Don
while porta.2 <> 0
wend
high portb.6
porta.2 has pullup installed but led on...
FYI
I got it working ok except I haven't been able to send back to the PIC yet.
Thanks Walter....
HSEROUT ["LABEL",",","Don's",",","Test",13]
PAUSE 10
Loop:
so like this huh?
HSEROUT ["hello",cr]
Hmmmm..... Maybe
SMD?? I think I have one of those in the garage......
I'll go get it and try it....be right back
I seen that and tried a 13 for the carriage return.......
HSEROUT ("HELLO",13] is this right?
There really is no code just the defines and HSEROUT. Bare minimum. It connects and I can see the little green box with the "R" in it flash red when I reset the pic. I can receive no problem with...
Yea I tried that but couldn't get it to work.
Thanks
Does anyone know how to use HSEROUT to talk to PLX-DAQ? I am getting a RX from PLX-DAQ
but apparently my format is wrong or maybe it just doesn't work with a PIC.
Thanks, Don
Hi Acetronics,
I want to output a pulse train to a stepper driver controller to turn a rotary table. If I make a mistake in entry or part way through the router cut I want to stop it. I realize I...
Thats what I thought. I guess I will use HPWM.
Thanks,
If I am using this statement, PWM portb.7, 127,100.
Is there a way to stop it before it finishes?
Thanks, Don
I finally got it........
Thanks Steve