I found my mistake:
Pin 4 is GP3
Pin 3 is GP4, but AN3
I had the wire attached to the wrong pin.
Duh!
Type: Posts; User: JakeMend; Keyword(s):
I found my mistake:
Pin 4 is GP3
Pin 3 is GP4, but AN3
I had the wire attached to the wrong pin.
Duh!
I don't know about new blood or even new problems, but I have lots of old versions of both that I will be grateful to share.
Thanks,
-Jake
I am not able to get the ADC on a 12F683 to work. The values it reports fluctuate seemingly randomly.
I have two 4.7K resistors attached in series between +5V and GND. A wire from Pin 4 (bit 3) is...
I want to sincerely thank all of the people who responded with advice and suggestions.
I not only got the initial problem solved, but I learned some things that I probably would not have figured...
I found out what to do. I need to reset the configuration file by inserting this code into beginning of the program
#config
__config _mclre_off
#endconfig
The pin 4 (bit 3) will now be an...
I am using a 12F683 and having no luck in disabling the MCLR pin (pin 4 bit 3) so that I can use it as an input.
In the PicBasic program, I put ANSEL = 0 to set all the pins to digital and CMCON0...