I reverse the pin 2 with pin 3 and now work.
Thank you.
Type: Posts; User: savnik; Keyword(s):
I reverse the pin 2 with pin 3 and now work.
Thank you.
I use a pic16f877a.
I will try again the max232 on easypic4 (i have test already with no success).
Thank you for the help.
I have code for AVR and for C8051 , but i don't know c language.
The pin 18 is connected to Max pin 11 and pic pin 19 is connected to max pin 12.
When connect the DB9 connection with hyperterminal and with those :
at
OK
at+creg?
+CREG: 0,1
OK
at+cmgf=1
OK
I attach all the circuit wich is assembly in one pc board
Why if i connect the DB9 connector to pc (hyper terminal) with rs232 cable all work?
I try and not work
I have check many times.
I have use this circuit.
If i connect to hyper terminal all works fine, but if i connect to pic don't work.
Yes, have max232.
I have a Siemens TC35. I can send message with hyper terminal. Also i have a easypic4 and i can connect with hyper terminal.
If i can connect the easypic4 with Siemens TC35 and use the bellow...
Thank you. I will try.
And if we have a variable byte or word how to display?
intcon=%00001000 'enable interrupt on PORTB
MainLoop:
if powerswitch=1 then ' Check if Power Switch Pressed
gosub pause1sec ' Wait 1 second
if powerswitch=1 then ' Still pressed?
gosub...
No problem.
aratti code solve my problem.
I change the duty manually with two buton's (up and down)
I had test and not work.Because next have count 255 + 1 = 256
Thank you. It is work.
I don't want use word variable , because pwr is for duty of HPWM.
I have a simple problem but i don't can solve.
pwr var byte
If up = 1 Then
PAUSE 50
pwr = pwr + 1
If pwr >= 255 Then pwr = 255
I want if the value is 0 (0-1023) to show like this picture:
Someone to help;
Hi Ioannis. (Γεια σου Γιάννη)
Can you post the shematic of ca3089 which you used?
I use the Bargraphs(lines) to show on lcd the volt from 0 to 5 volt with adc 10 bit.
How to change the code to show always at first Col the first character.
Like this : from ||||| to show only | if...
Yes it is a constant number.
is from : 28,224+10,7 = 38,924 and the 0,0625 is the step
I can live with the integer limits of PBP.
I can not use PBPL because i use pic16f88.