Solved,
receive:
Serin2 PORTC.0,B2400,10,LOP2,[wait ("#OK"),HR,MINS,SEC,DATE,MON,YR , LCTEMP.highbyte,lctemp.lowbyte , LPRES.highbyte,lpres.lowbyte ,_
vlaga...
Type: Posts; User: visnja30; Keyword(s):
Solved,
receive:
Serin2 PORTC.0,B2400,10,LOP2,[wait ("#OK"),HR,MINS,SEC,DATE,MON,YR , LCTEMP.highbyte,lctemp.lowbyte , LPRES.highbyte,lpres.lowbyte ,_
vlaga...
I just tested a humidity sensor and his value are correct on lcd and TFT but value of lux are ok if are they below 255.
How to send variable word size over serout2 commands,I think this is my...
I am stuck with serin2 and serout2 comands.
I use PIC18F252 for reading sensor.
BMP085 for temperature and pressure
DS3231 for time and date
BH1750 for light intensity
DHT11 for humidity
...
the portd.7 signal is a limit switch for max position of open window.He must disable opening,but if something goes wrong I will put a second hardware switch to disable motor.
On test board this...
when I press a button and hold it the led diode is on.That is OK.when I release a button led is off.
Is it possible to make that when the button is pressed and hold, led is on, and when I...
ADC is not a problem, measure & scale result (1v -> 0, 3v -> 1023, 10-bit ADC) ...... Yes it is problem
This is my problem I can measure voltage from sensor but how to scale it to UV intensity...
http://www.ebay.com/itm/351494135550?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I know that the maximum voltage from the module is 3.3volts and my PIC AD module can measure 5...
I create a six buttons on LCD and one button must work like a push button.
When I push the button, the LED which is connected to PORTD.0 must light all the time as the button is pressed.
When I...
On board is 3V3 voltage regulator so I think it must work with 5V input voltage.
Hi to all and Happy New year.
Today I receive a UV sensor ML 8511.
Watching his datasheet the output voltage is linear to intensity of the UV light.
How to measured voltage convert into a UV...
Hi to all,
I tested this library and works excellent with AM2302 sensor.Is it possible to measure negative temperature with this library.I dont have a FREEZ spray at the moment so I can not tested...
I include file flash_spi.pbpmod there is two labels with the same name FL_IMG: is it OK or one labels is too much?
I tried to test the repetitively button, it works but not as expected.
When I touch the button the counter starts counting, and its value increases every 300ms for one and then suddenly...
Yes,wrong include I use,now it is work.
I create a counter,and when I touch the button counter increase e his value for 1.Each press increase counter for 1.
COUNTER=COUNTER+1
Is it possible to...
Why I can not write lovercase letters only capital letters work?When I write lovercase letter I got only a bad piksel on screen.
Buttons now work excellent.
I have several questions about the code pic18f2520_tft_demo.pbp.
how I can change color of screen wallpaper from black to yellow
how I can changes color of buttons from red to green and...
I managed to run a python script FLASH.py and ImageConvertor565
.
in the FLASH .py scripts can I put COM.1 as default port to communicate with PIC chip?
On which the port and pin I ...
I download python 2.7.10 version for windows and when I run it I get some errors.
When I open script FLASH.py and pres F5 button run module I got this message:
Python 2.7.10 (default,...
Because I'm not a good programmer there is a few things that are not clear to me.
Where I can download the Arduino utft ImageConverter 565.exe.I found only a online converter on Rinky-Dink...
OK,it works now.I replace a voltage regulator on EASYPIC 5 board from 5V to 3.3V and it works.
What I need to do to send JPG picture to TFT display?
Is it possible that I destroy my TFT-display because my power supply for PIC18f4520 is 5volt?Communication between PIC and ILI9341 is on 5 volt.
Hello people
if someone tried Richard's example with PIC18F2520 or PIC18f4520
I tried his example with PIC18F4520 and unfortunately not working. I have just a white screen.
If someone can send...
hi Richard,
today arrived TFT display to me from eBay.
I can not wait to start playing with it
Do you can tell me if this is the correct way to connecting peripherals with a PIC processor ...
Hi Richard
I am little confused how to adjust code to work.
I have a PIC18F45K22 and I plan to use it with your code but I never work with this PIC processor and I need some Help to...
HELLO Richard,
If you could give me some explanations about connections of the LCD display on PIC processor.
I just ordered one piece from eBay and on it I have these pins:
LCD DISPLAY...