@Rufinus
Check here maybe you'll find the solution
http://pinouts.ru/data/siemens_c55_pinout.shtml
Type: Posts; User: Lotondo; Keyword(s):
@Rufinus
Check here maybe you'll find the solution
http://pinouts.ru/data/siemens_c55_pinout.shtml
Thanks for tips.
I tried but no success.
Well I'll try to change the phone, maybe the 7110 is not the right one.
Even in my working test (msg.135) I could see that it was unstable, sometimes it...
After a long rainy Sunday day spent in front of 16f876A I think I got where is the problem but I can not give me an answer of why this happen.
Please see code in the msg. 130+131.
If I use serial...
Well,
I think so. I'm using Kasamiko's schema + max232 to monitor the dialog between pic & phone.
I already tried several code list, I can send sms out if an event happens at a programmed port and...
Ioannis
thanks for answering.
As you know i have problems with hserin.
The WELL DONE should come out on the screen cause i'm monitoring
via max232 what it's happened between the pic & phone.
I...
I did some delay, nothing changed.
I made another test, here is the code:
DEFINE OSC 20
DEFINE HSER_TXSTA 24h
DEFINE HSER_RCSTA 90h
DEFINE HSER_BAUD 19200
DEFINE HSER_SPBRG 64 ' 19200 Bauds...
Hi everybody !
Here I'm again.
I moved to pic 16F876A + Crystal 20MHZ
Here is the code:
DEFINE OSC 20
DEFINE HSER_TXSTA 24h
DEFINE HSER_RCSTA 90h
DEFINE HSER_BAUD 19200
DEFINE HSER_SPBRG 64...
Well Mister_e,
in one way i agree with you but pls. have a look to msgs. 113, 118 and 120.
How can you explane me that in this test everything is working great ?
Pls do not missunderstand me, I...
Hi Guys,
here is my first test, unfortunatly no success.
I tried several changes in the code but always something went wrong.
This is the code:
;Device 16F84A
DEFINE OSC 4
CALLER VAR BYTE[13]...
Kasamiko,
I'm making some test about reading sms received.
I'll let you know as soon as I have some good result.
Bye
Lotondo
Ps: Are you a vampire ? 8) You are always writing in the middle...
Guys, I finally successed !
The Nokia 7110 did work too !
Here what I did:
The 7110 boots and sets itself in autobaud mode,
even i forced it to work at 9600 baud with
AT+CBST= 7,0,1
it did not...
Tried with Sony Ericsson T610
it works just GREAT !!!!
I dont know what's wrong with damn Nokia 7110 !!
Any help will be appreciated
Thanks
Lotondo
Hi,
i added this line
SerOut2 TX, BAUD, ["AT+CBST=7,0,1",13]
but no success.
I'm running out of ideas.
Thanks for yr help
Lotondo
Hello,
as far as I know, I read again the manual, it's not possible to set baud speed to be used through the port. The only set possible for baud speed is if you want to connect to the internet...
Kasamiko,
thanks for answering.
I did what you said.
Now the LED1 is always on and not flashing like before. This should be ok.
Led 2 is just flashing once cause I turn the loop off.
Till here...
Kasamiko,
thanks for sharing your project.
I built it according to your above schema but the test I did had no success.
The pics receive 2.8 V. from the phone, is that enough ?
IC2 has your...
I have the same problem with hyperTerm, how were you able to send AT cmds ?
Thanks
Lotondo