Thanks for the contribution !!
Type: Posts; User: mackrackit; Keyword(s):
Thanks for the contribution !!
Taylor did not write SDFS.bas for the record, I believe it was Jeff Schmoyer from MeLabs.
Anyway, here is an old example that might help....
https://www.youtube.com/watch?v=8e1ktRjeOuI
Ambrogio,
I am curious as to how you reassigned the functions of these pins. As far as I know it is not possible. The pins can be used for other things such as MCLR can be used as an INPUT, but...
I will guess that you have the chips in circuit and the three programming pins are connected to something.
You will need to disconnect the three pins or in some way isolate them from the remainder...
That chip is supported with the Gold edition.
http://pbp3.com/devicelist.html
You replied to a seven year old thread... It would be best to start a new thread.
When you start the new thread be sure to include the PIC you are using along with the WIFI module you are using. ...
I understand what you mean about dead links, they are annoying and should be fixed somehow when found if possible. But even a thread or post with a dead link can be useful so we will need to be...
The MAX6675 has cold junction compensation built in, but only works if the cold junction is close to the MAX6675.
This article explains cold junction compensation in detail....
And I will add... Take extra care with your cold junctions. The 6675 does a good job compensating if the junction is close and in the same environment as it is. As do not have the cold junction on...
Unless you are trying to get the fractional part of the reading 10 bits is all you need.
Hi Ioannis,
Everything is fine, I just got really busy with work and have been doing more with python on the PC. Thanks for asking!
If all goes well I will be hanging out here more this summer.
Right here would be as good a place as any.
Post a link to the thread or post in question.
Are both chips running at the same speed?
And this tells how to pass data.
https://web.archive.org/web/20120307050558/http://www.rentron.com/PicBasic/VB_PIC_TEMP.htm
http://www.picbasic.co.uk/forum/content.php?r=278-Pentax-Nikon-IR-Remote
Thank you Lester!!!
Give this a try.
#CONFIG
__config _HS_OSC & _WDT_ON & _MCLRE_OFF & _CP_OFF
#ENDCONFIG
@ errorlevel -306 ' supress page boundry error
Use the EEPROM on the 12F683. No need for an external EEPROM.
The 12F683 has an EEPROM.
Depending on how often your light signal changes, write that value to the EEPROM. When the chip boots have it read the EEPROM first to get the value for PWM.
Or if...
Code tags...
When you click reply to thread a basic reply dialog shows. At the bottom right there is an Advanced button. That will take you to a full editor.
Look for # in the toolbar.
What is your ADC source and how is it connected?
What are the current readings and what are the expected readings?
Post your whole code. State the parts you are using and how they are connected. Verify the SD card is good, 2 gb or less and formatted FAT16.
Do you have this line near the top of your code ?
...
What browser do you use? Works fine on Chrome and Firefox.