Is there a really easy to use method to see if there is some type of digital communications being passed through a wire? I am looking for something I can hand to another person with 2 minutes of...
Type: Posts; User: Szczepaniec; Keyword(s):
Is there a really easy to use method to see if there is some type of digital communications being passed through a wire? I am looking for something I can hand to another person with 2 minutes of...
I found an issue and correcting it seems to correct the issue. However, I am left a little confused as to what is going on. I am using MC Studio 5.0.0.5 with Melabs programmer v4.51 on a computer...
No dice. I have tried yet another PIC to make sure I didn't damage the last two and tried a different programmer in the event that was damaged (1 in a million, I know). My gut is that I am missing...
No, it didn't. Nothing was out of the ordinary as far as I could tell. It didn't before I added the alldigital file to the folder but I did it anyway just in case. I am completely baffled.
I have tried doing gpio.0 as well with no better result. This cut and paste is just the latest thing I have tried out of desperation. Not that it is right but I have numerous other programs that I...
Sorry. I should have put the PIC in. It is a 12HV615. I have Darrel's ALLDIGITAL file in the same folder as the project folder and everything compiles and acts normally. I have also tried more than...
Here is the code. It will not toggle the pin. I have to be missing something painfully obvious. I am hoping somebody will spot it immediately and while making me feel dumb, save me another 17 days of...
I am using an OSRAM, SFH 300 FA-3/4 which works fine. It is apparently a problem with my code because it doesn't work on my breadboard but a more basic program utilizing the WPU, ADC, and an LCD...
I have a piece of code I am having issues with and suspect it may have to do with the ADC and WPUs I am using. I am using a phototransistor to ground and attempting to read a relative value with an...
Thank you for the response. Charles from Windblown Solutions has provided me with a solution.
I do not have the time nor the desire to learn how to work I2C communications with PICs. I am sure it is really easy but all the examples I am looking at are just making my head spin. I need code...
I just spent a day and a half wondering what I did to my code to make it not work. Nothing made sense, things didn't work, and generally everything was a mess. After pulling back and reading PICS...
The system does run on batteries. That doesn't mean there aren't other sources of noise on the board but during troubleshooting I reduced or removed all of them to the maximum extent possible. I...
I just typed for 15 minutes explaining everything and pressed "Reply to Thread" instead of the button on the bottom "Post Quick Reply" which wiped out everything I typed. This might be something...
I just found the issue. It is a mystery why this PIC was affecting the LCD but it appears the display is very sensitive to BOR. If the ground is switched off and back on within 15 seconds or so the...
The other PIC does run the LCD but displays everything just fine until this PIC is plugged in. It also displays fine if plug the PIC in but comment out the setting of the TRIS registers for those...
I have been grabbing for straws for about 20 hours on this. I have two 18F2525s working together and using 4 lines of DIO to do signal a few different states between the two. The issue I have boils...
I have a need for somebody that knows more than I (should be most people reading this forum) to do some PIC programming and some board layouts for me. It is on site in Denton TX so that the persons...
I guess I will join the crowd that doesn't trust the programmer menu. I wonder how many other projects I have scrapped in frustration over the same or similar issue?
It worked. Thank you very much.
Why didn't it work when I selected that choice in the programmer menu?
I am having an issue with a project running an 18F2525. It is my understanding that when I choose ECIO for the OSC in the meProg configuration that the PIC should be taking the clock signal in on...
Thank you for the help. The issue was with me doing something I should have known not to do. I was using the internal osc at 8 Mhz to run it. I switched to and EC and everything is fine. I...
This seems like the most basic of problems and it is probably just the frustration of trying it for hours that is keeping me from the obvious answer. I have a New Haven Display Serial LCD 20x4...
I need a person with PIC Basic experience to tutor students learning PIC Basic Pro from 10-14 October. Local to Fort Walton Beech is preferred but we will cover travel expenses if you are located...
Unsolved is relative to my world. Until it makes sense in my pea brain, it is unsolved. However, it is solved now.
Thanks for all the help. I was unaware of the graphs posted here and when I...