Search:

Type: Posts; User: dumato52

Search: Search took 0.01 seconds.

  1. code

    Thankyou Ioannis, i have decided to remove the option for the response from the phone since i think that can only be achieved practically not through simulation, BUT, i have encountered one problem!,...
  2. simulation

    Thankyou Ioannis and f Lez for your contributions, i got the point of no response from the virtual terminal, am wondering how can i make it respond, like when pic16f877 sends ''AT'' ,terminal is...
  3. Hullo Ioannis, probably u needed details,my code...

    Hullo Ioannis, probably u needed details,my code is below,am using pic16f877,
    code:
    DEFINE OSC 8
    DEFINE HSER_TXSTA 20h
    DEFINE HSER_RCSTA 90h
    DEFINE HSER_BAUD 9600
    DEFINE HSER_CLROERR 1
    ...
  4. simulation

    I have practiced simulation, now i was trying to simulate my project above but Virtual terminal is showing AT,AT, AT contineously after pressing ON the push button. What could be the problem?
    regards
  5. simulation

    Thankyou Ioannis, am going to do that
    regards
    dumato
  6. change of pic

    Thankyou Ioannis, Now the only choice is to change pic but i will have to just to simulate it bse i had only pic16f84, but wen i changed to pic16f877 and tried to simulate, nothing appeared on...
  7. size of hex file

    When i compile my code i generate HEX file of 3KB which cant fit PIC16F84, since its limit is 1KB is there a way i can compress it and load it into pic16f84
    regards
  8. hyperteminal

    Thankyou Ioannis; i have tried to change the baud rates but still no response.
    regards
    dumato
  9. Hyperterminal

    When i connnect the phone to the PC and test the cable with hyperterminal, there is no response thats no ERROR or OK, what could be the problem,
    I used the following commands at the hyperterminal,...
  10. phone interface

    I have found that i can use DLR3 cable, trying to look for and test
    regards
    dumato
  11. phone interface

    Thankyou for ur advice on GSM module but i think i can easily get 6210/6310 nokia in my country, how do i test whether it supports AT commands?, will it be affected by the baud rate i set at 9600?
  12. phone interface

    Thank you Ioannis, i highly appreciate ur help;
    Now i need to connect the phone to microcontroller, am looking for the models u told me nokia 6210, 6310 but i needed to know when i acquire the...
  13. I read through the manual and made the changes,...

    I read through the manual and made the changes, now the new code is succesful with 16f84 but i wanted the same message to be sent to two phone numbers, pliz help me and check the code below;

    code:...
  14. Thankyou keith and Ioannis for ur contributions,...

    Thankyou keith and Ioannis for ur contributions, pliz help me with the link for the manual and i try to follow it up. I dont have hard copy, mean while i wil make the changes u have told me
    regards
  15. pic16f84

    Thankyou Ioannis, currently its pic16f84 available for my project and in my country its hard to get access to microcontrollers so i have to just utilize it.
    I have replaced HSERIN/HSEROUT with...
  16. sample code

    Thankyou for ur contributions, about the code, am totally new in Picbasic programming but i got some code from the forum and tried to make it suit my project, it returns sucess when its pic616f877...
  17. PLIZ CHECK MY SCHEMATIC,pic16f84->max232->gsm phone

    Hullo friends
    Pliz check my schematic attached whether the connections are ok and guide me, the pic16f84 should instruct the phone to send SMS when push button is +5V, which phone do u suggest i...
  18. Replies
    1
    Views
    577

    Pic16f84 and pic16f877

    Thankyou Luckyborg
    i have a pic16f84 microcontroller to be connected to the phone, some posts used pic16f877, i dont know whether program for pic16f877 could help me
    i need ur guidance pliz...
  19. Replies
    15
    Views
    2,447

    New version

    How much will the new version cost?, i need to get it
  20. Thread: SMS via pic

    by dumato52
    Replies
    15
    Views
    9,863

    SMS via PIC

    Hullo every one thankyou for ur help;
    I am doing project related to the one of kenandere above, but am not using the sensors, am using +5V to act as an interrupt to PIC16F84 microcontroller which is...
Results 1 to 20 of 20