Hi all,just want to know whether the pic basic pro program can be use to
program a higher resolution like 320 X 240 Dots LCD Module instead of just
the standard 128 X 64 Dots GLCD module?If...
Type: Posts; User: mesamune80; Keyword(s):
Hi all,just want to know whether the pic basic pro program can be use to
program a higher resolution like 320 X 240 Dots LCD Module instead of just
the standard 128 X 64 Dots GLCD module?If...
Hi all,just want to know whether the pic basic pro program can be use to
program a higher resolution like 320 X 240 Dots LCD Module instead of just
the standard 128 X 64 Dots GLCD module?If...
Hi there ,yesterday i had tried the timer interrupt function but ,i think i need one more interrupt for my sensor to detect (i use RB0 to trigger the pin) but i encounter 1 problem ,which is in my...
Thanks sougata for the info,i'll try and work it out then .thanks!
Actually i just need it to use in my RPM counter program ,the loop which need to be executed is a repeated count loop that add a variable everytime a pin becomes LOW.(which i use a photosensor to...
Thank you very much to sougata for this useful information,now i got the rough idea on how to do the job,but for PBP there is only ON Interrupt for any interrput command,is it neccessary or should i...
Hi there,i would like to use a timer delay for my loop,
which mean to say that when i go in a loop a timer like 1 minutes(actual time)
will start to run.
After 1 minutes elapsed then the program...
Hello guys/Gals,
As stated above ,Anybody ever use this A3977 MicroStepping DMOS motor driver with translator together with any pic microcontroller?Thanks.
Hi there,i am trying to migrate from PIC16F877 to some higher speed Microcontroller like PIC18F series i need 5 PWM channel or more and 10 bit ACD Resolution,USB compatible ,40 I/O pin or more...
I am not using proton ,my basic compiler is from this www.oshonsoft.com
i choose this "PIC Simulator IDE" because it builds in alot of simulator tools,so that i can easily debug my program,its...
i already correct the Rx and Tx ,but still cannot ,is it neccessary for me to use HARDWARE USART?
I am using the oshonsoft pic basic pro to write the code my Rx and Tx code are as follows:
(Transmit)
Dim a1 As Byte
Dim temp1 As Byte
EEPROM 21, 4
scan:
If PORTA.2 = 0 Then
Gosub...
hi,there i am now stuck with pic to pic communication i am using the same crystal for both the microcontroller board i try to send some byte to another pic i use the simulator to monitor the transmit...
Hi there,i am doing a project regarding this pic16f877 .i have this let's say B board to display the information of either one of them (A or C).the method i use is via serin and serout .I have a...