Hello,
I have small project using PIC18F26K22 with 8MHz crystal external oscillator. USART output from PIC is connected over TTL to USB and I use TERMITE serial software to read data from PIC.
...
Type: Posts; User: CipiCips; Keyword(s):
Hello,
I have small project using PIC18F26K22 with 8MHz crystal external oscillator. USART output from PIC is connected over TTL to USB and I use TERMITE serial software to read data from PIC.
...
thank you very much this is what I've been looking for but couldnt find
thx
Hello
I was wondering is there any tool that generates configuration bits code for picbasic pro ?
In mplab there is option under windows-->configuration bits, then you can select what you need...
aha
thx for answer now I understand how that works and it is clear to me now. So program created in C++ or C# will send info to USB, and program for PIC will register that info from USB and do...
I will try to define better my question
First I have googled and find out that I cant program PIC in C++ or C#, I can only program it in MikroC, PBP, ect. softwares that are made for programming...
Hello
Is it possible to combine C# or C++ with Pic Basic Pro ?
For example I have LED that is connected to PIC, and PIC is connected to PC via USB. So when I create window in C# or C++ with...
Hmm
so I should put all my pins (register E,C ect.) that I am not using to OUTPUT
I am lil bit confused now ?? how to chack that ?
HI
here is the schematic:
http://img153.imageshack.us/img153/7324/evob.jpg
I have tried to enable BOD, and these are results:
When I insert PIC into Board and turn the switch on, program...
Hi
I have a very strange problem with PIC 16F877A, When I enter program into the PIC and plug PIC into circuit board and turn on the switch, everything is normal and work like it should work. But...
Hi
I have a one small problem, I cant figure it out ?
I have two buttons, PIC 16f877a and a Servo Motor.
My goal is when one button is pressed that motor turn left, and when another one...
thx Steve
I will probably have few questions, now I will contion on my work
thx
So this ADRESH is the adress where AD save it's value ?
what if I have two, three or four AD, is it all stored in same adress ?
I am using PIC 16f877A
this is the code
DEFINE ADC_BITS 8 ' Set number of bits in result
DEFINE ADC_CLOCK 3 ' Set clock source (rc = 3)
DEFINE ADC_SAMPLEUS 50
ADCON1 = 0 ' PORTA...
then why this doesnt work:
I have a potentiometer on pin 0 (AD), and when I turn that pot to one end (left or right) my values of variable should be 0 or 255. And when I wrote IF function nothing...
Hello
Does anyone know what is the maximum and minimum value of variable at 8 bit AD conversion (PIC 16f877A)
For example:
pw var byte
adcin 0, pw "read AD value on pin 0 and store it...
Hello
I am trying to find on web for some example of slowing down servo speed using potentiometer, but I cant find it.
I am using PIC 16f877A and I have a potentiometer connected on AN0 pin,...