In the 5 Min it took me to read this thread started by Melanie in 2004 & the PDF referenced by mister_e.
you have solved:
I now understand how to read and make sense out of the Microchip data...
Type: Posts; User: sbobowski; Keyword(s):
In the 5 Min it took me to read this thread started by Melanie in 2004 & the PDF referenced by mister_e.
you have solved:
I now understand how to read and make sense out of the Microchip data...
sweet i'm pulling up the data sheet right now!!!
Thank you!!
ok my problem is in my external components,
i tried playing with the Define PULSIN_MAX that didn't work
i swapped out my 1uf cap for a 4.7uf cap little change
47uf cap great improvement, a little...
is there such a a thing as a Pulsin alternative?
i'm using a 12F675
right now i have a chunk of code
radioIn:
PULSIN Radio,1,P
' With 20 meg osc pulse measures...
Works GREAT thank you!!
i did it on a pic16f628A and moved them to Port.B
ok i found
OPTION_REG.7=0 ' Enable weak Pull-Ups
and micro code studio accepted that.
so why does option_reg not have a # behind them
and ADCON0 Does ???
Thanks again in advance
sorry if...
ok i have the data sheet
http://ww1.microchip.com/downloads/en/DeviceDoc/40044F.pdf
Page 25, REGISTER 4-2: OPTION_REG – OPTION REGISTER (ADDRESS: 81h, 181h)
ok i understand that bit 7 needs...
hello,
Never posted here before. But I do read a lot.
Any way maybe this will help some one starting out with LCD's
I use Pic Basic Pro Version 2.50a
Micro Code Studio Version 3.0.0.5
I have A...