Dear friends, I can not get anything with the pbp module. I would like to read the id of the device or something basic, if any friend has some basic code thank you, I do not want to leave the pbp for...
Type: Posts; User: vicce67; Keyword(s):
Dear friends, I can not get anything with the pbp module. I would like to read the id of the device or something basic, if any friend has some basic code thank you, I do not want to leave the pbp for...
Dear friends,
Could you help me with the tcs34725 color sensor, would you have some basic example?
thanks in advance ,
vicente
Dear Friends,
I am making the communication as in the code below saw rs232.
I want to do using the usb and the pic18f4550 I don't get.
How to do the "SerIN" and "SerOut " for the usb...
Dear Friends,
With the pbp 2.60 and the micro code studio ver.2.3.0.0 when I compile, how to know the amount of used ram and the amount of free ram ?
in advance thankful,
vicente
dear friends,
I need a simple example of communication usb between a pic18f2550 or 18f4550 and the pc using delhi 5.
in advance thankful,
vicce.
Dear Friends,
exists some better and more complete editor than the microcode studio for the picbaic of the type of the editor of the mikro basic ?
in advance thankful,
vicente
Dear Friends,
Why don't get to read or to record the eepron of the 18f4620 after the address 255
example read 300,a or data @403,001
doesn't have effect after the address 255
...
I am using the 18F4620 and When I call the file in the pickit2 him of the the following message:
Some configuration words not in Hex.file
Ensure default values above right are acceptable
...
thank you very much Archangel
helped a lot
thank you very much Bruce,
now it works.
the case sensitive it was linked.
Dear friends,
I am using a 18f4620 now with these configurations:
__CONFIG _CONFIG1H, _OSC_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H & _PWRT_ON_2L & _BOREN_ON_2L &_BORV_2_2L
...
Dear Friends,
I Use the 16f877 to many years and now I need more memory then I want to migrate for the 18f4620.
my initial header this like this:
@ device pic16F877,HS_OSC,...
Ok Pimentel obrigado,
Vi que voce e' brasileiro,
Entao o final da memoria apontada no compilador pelo mcs nao 'e 16384 para o 18f452 e sim 32768.esta correto isto ?
Dear Friends,
I Use 0 16f877 7 years ago with pbp.
now I need more space and I opted for the 18f4520.
when I compile in the 16f877 the hex it is with 8056 bytes and in the...
Dear Friends,
Thank you for they help with the 16f887,
Now I to use the 16f727 and I need some examples for capacitive touch botton in pbp
thank you very much to the friends,
...
Dear friends,
Somebody has a good example of capacitive touch button for the 16f887 in pbp.
in advance thankful,
vicente.
Thank you very much friends,
I hope to also help,
excuse my English, I am Brazilian
Dear Friends,
it is possible two pic's they access the same memory I2C (24lc256)
thank you,
vicente
Dear Friends,
I use 16f877 there are many years with pbp 2.47 and mcs 2.3.0.0 with this configuration
@ device pic16F877,xt_osc, wdt_on, pwrt_on, bod_on, lvp_off, protect_on,wrt_off
OPTION_REG...
Dear Friends,
I use 16f877 there are many years with pbp 2.47 and mcs 2.3.0.0 with this configuration
@ device pic16F877,xt_osc, wdt_on, pwrt_on, bod_on, lvp_off, protect_on,wrt_off ...
dear friends,
there is possibility to connect a device usb with a pic as if it was communication serial (tx,rx)?
thankful
dear friends,
I need help to tie a telephone cellular motorola v235 with usb with any pic, to send a sms.I ask for a simple idea because I need to send only 5 commands everything in low...
dear friends,
does possibility exist of transforming the pic 18f2450 OR SIMILAR in an usb conversor for serial (RS232)?
if possible they can show an example?
in advance thankful,...