TCXO si a 32.768kHz Oscillators ?
I used the internal 32.768kHz oscillator of a PIC.
Type: Posts; User: luxornet; Keyword(s):
TCXO si a 32.768kHz Oscillators ?
I used the internal 32.768kHz oscillator of a PIC.
I found something like this here:
The second characteristic is parity. The parity characteristic can be even, odd, mark, space, or none. If even parity, then the last data bit transmitted will be a...
I figure a HelloWorld program and works fine in Proteus Simulator.
But I stuck when I try to read AN0 analog port.
The PicBasic ADCIN 0, something return "0".
No better luck when I try to...
Thank you very much HenrikOlsson and Heckler.
I can compile now my PIC16F1786. Because you provide me a lot of information about this micro, I decided to read (finally) some information provided in...
I try to compile this with PicBasic 3.0.7:
'PIC16F1786
#CONFIG
__config _MCLRE_OFF
#ENDCONFIG
for PIC16F176 but I got an error:
[ASM ERROR] CODE_1.ASM (33) : Argument out of range...
Thank you very much, HenrikOlsson.
The DATA statement is exactly what I need (but I never use it until now).
Hi!
My PicBasic program use some EEPROM address to store variables. I wonder how can I initialize these EEPROM address (I use about 5-6 bytes) at programming time.
I use PicBasic 3.0.7 and PicKit3....
I tried with 8MHz resonator and DEFINE OSC 8.
The LCD attached to PIC display data properly and all other thing work well.
Somebody else tried large PAUSE?
For large amount of time, Pause does'nt seem to work well, the measured period is less than I expected.
main:
high Led
For i = 1 to 30
pause 100
next i
low Led
for i = 1 to 30
Thank you for your answer, richard.
I know that RA4 is Digital I/O – Open-drain when configured as output.
I will try adcon1=6
Hi!
Please help me to configure RA3 and RA4 as digital out (PIC16F876A). On Proteus simulator all are working fine but not in real world.
I know that RA$ is Digital I/O – Open-drain when configured...
I have a pic16f628a and l293 stepper driver.
I need a picbasic sample code to drive this.
Thank you.
Hi!
Can somebody help me to config 18F4550 (without USB) in PBP 2.60?
I want to use
1. internal 8MHz oscillator
or
2. external 20MHz oscillator.
My English skills doesn't allow me to...
You made that PCB in Proteus?
Congratulation, Fratello!
Good work.
Hi fratello!
I tried to compile but I got :
Error UNTEST~.ASM 440: [235] opcode expected insted of 'error'
Hi!
I made my own tacho-volt-therometer with about the same schematic:
http://www.vandi.ro/electronics/turometru/turometru_auto.htm
This page is in Romanian language but maybe you and others found...
Hi.
I try a small project that send command via PC serial port to a PIC12F625 connected without MAX232. I use some example from Serial Port Expander.
Here I try to light a LED connected on pin...
Thank you, Henrik
Hi!
I am familiar with PIC16F628, PIC16F684/688 micro controllers.
I don't understand if PIC16F876A has a built in oscillator or not, like 16F628 has.
Thank you.
If a stepper motor vibrate this is happen because the power supply is too low or the rotation speed (given by the code) is too high.
Thank you very much, mackrackit.
Well, an old post for an old problem.
Thank you very much, Darrel.
My previous error was: [218] address limit of 7ffh exceeded.
I switched to 16F648A and compiled the source code and now I got a warn: [102] code crosses boundary @...
I use MCS Pro and PicBasic Pro.
I noticed that there are (probably) a limitation on compiled code when I use PIC16F628 2KB.
It is indeed a limitation or wrong?
Thanks.
I will reinstall Picbasic for that missing files!
Thank you very much.