Hi frend here is my code
' FONT OF DOT MATRIX
EEPROM 0,[0,127,32,16,0] ' 1
EEPROM 5,[49,73,73,73,39] ' 2
EEPROM 10,[54,73,73,65,34] ' 3
EEPROM 15,[4,127,36,20,12] '4
EEPROM...
Type: Posts; User: chai98a; Keyword(s):
Hi frend here is my code
' FONT OF DOT MATRIX
EEPROM 0,[0,127,32,16,0] ' 1
EEPROM 5,[49,73,73,73,39] ' 2
EEPROM 10,[54,73,73,65,34] ' 3
EEPROM 15,[4,127,36,20,12] '4
EEPROM...
hi friend's,I did save in attached file , basic code , proteus sim
I did try to used dot matrix 8x8 display, niw i can show number on dot matrix
next step i need to make displsy move left/right
How have idea pls help
pls see our file attached
Ok ,my problem was resolve by we remove If founction out,
code:
Case 11 'Read save data
' If sw_up = 0 Then
sw_Mode_data = 0
sw_up_data = 0
...
my protect for control stepping motor
case 11 and 12 , we cannot read data frome eeprom
case 21 , we cannot write data frome eeprom
case 22 , we cannot write data frome eeprom
case 23 , work...
pls help me verify my code not work, why???
case 11 and 12 , we cannot read data frome eeprom
case 21 , we cannot write data frome eeprom
case 22 , we cannot write data frome eeprom
case 23 ,...
thank , where i can get detail of pbp260 pls...
thank you
after i restart pc and not problem !!!
Found this :code crosses boundary @800
what is problem of my code
DEFINE LOADER_USED 1
INCLUDE "modedefs.bas"
'-------------------------- Ports settings...
I got many error with my code if we used pbp260 complier
but if change to pbp247 my code can pass complier
what is differance between 2 version
Sorry for wrong post this is proton code
I did make code with ir decode for control on/off output
now ir decode work properly but we need to add input switch for control also.
Right now we used...
I got abnormal on micro code program some time mycode don't some time work (with same code)
Who is know this proble pls advice too..
' and next
'READ TIME FROM DS1307
TIMEDS1307:
LOOPP=0
loop:
i2cread dpin,cpin,$d0,$00,[b1,b2,b3,b4,b5,b6,B7]
'pause 10
'BB=B1
Here is my code , Time/temp display and IR decode
Pls advise ...
Define LOADER_USED 1
DEFINE OSC 4
@ Device pic16F877A, xt_OSC, BOD_OFF, PWRT_ON, WDT_OFF, PROTECT_OFF 'WRT_On
Segments ...
I did study about pic basic code but confuse about sequence of interrupt. for now i did make project with 5 sw buttom, IR for control o/p , time ds1307,Temp DS18s20 and 7seg (muliple scan dis)for...
HI I TRY BELOW CODE IS WORKING THE DISPLAY SHOW "K000" BUT WE NEED TO CHANGE FONT K TO C HOW TO CHANGE IT ,WE DON'T SEE CODE OF "K" WHO KNOW PLS ADVISE
[CODE]:
DEFINE LOADER_USED 1
DEFINE...
I try to doing LCD disply with Nokia 3310 display but not achieve need help.
I used code for this web and change port control, see be low for my code
[code];
;=------------------------------=...
here is circuit ...
I cannot attached some picture file..
Let you show circuit daigram..and some detail of 3 bottom function.
I never try about this
Let you see in code example i have place it
About code is work no problem we post for share idea for other peple.
"Code Example " is forums for place with sample code with working right...
Here is sample code of time display on 7 seg
we try on pic16f877a ,DS1307
Code:
Define LOADER_USED 1
define OSC 4
include"modedefs.bas"
Digits VAR PORTD
SEGMENTS VAR PORTC
Hi every one i would lioke to share with my project.
I did make temperature display and show on 7-seg.[ 45.5C ]
Code:
Define LOADER_USED 1
DEFINE OSC 4
@ Device pic16F877A, xt_OSC, BOD_OFF,...
Hi sayzer thank you we done after try remove 2 ms out.
Buy the way we will post this code in exampls code for share with other peple
Now we finish 7 seg display temp form ds1820 about 90%
But we stil have porblem with display fashing and i have try at 20 Mhz cannot resolve it
Code:
Define LOADER_USED 1
DEFINE OSC 4...