Serout2

hi,

in page 141 of the PBP Manual , (you can download from here: http://melabs.com/downloads/pbpm304.pdf) ,and in SEROUT2 command, it says:
"Bit 15 selects whether the data pin is always driven (bit 15 = 0), or is
open in one of the states (bit 15 = 1). The open mode can be used to
chain several devices together on the same serial bus."

can anyone explain more about this paragraph. (open and driven?)

with best regards.

See if this helps

http://www.picbasic.co.uk/forum/show...en+serial+port

Let us know if this helps.

hello mackrackit,

thanks for your help. it helps me.

with best regards, Mostafa, Iran