Program Code and Program Memory

I am using MicroCode Studio Plus (V2.3.0.0), PBP 2.47, and MPASM.
I thought that the porgrams were stored from high memory down (as in the MSLoader hex file).
I just noticed that the code I am loading is going in at the the begining of program memory. It doesn't even skip the Interup Vector locations.

????????????

Program code for 12-bit & 14-bit core parts always starts at 0. For 18F
parts, you have the option of using DEFINE RESET_ORG to force the
reset vector to another location.

If you're using the MCS loader, just use DEFINE LOADER_USED 1 to leave
space from 0-4 for the loader jump.

The MCS loader occupies high memory - so it's out of the way of normal
program code space.

Interesting, but the code is being written into locations 0008h thru 0018h which the data sheet indicates is for interrupt vectors.

??

Unless you tell PBP to do otherwise, it's always going to drop code in the
hardware interrupt vector locations.

Try something like this;

Code:

---

DEFINE  INTHAND HIGH_INT  ' High Priority Ints
DEFINE  INTLHAND LOW_INT ' Low Priority Ints

ASM
HIGH_INT
  blah
  blah
ENDASM

ASM
LOW_INT
  blah
  blah
ENDASM

---

Now PBP will insert jumps to both of your .asm interrupt handlers at both high
and low hardware interrupt vectors.

If you use the BASIC ON INTERRUPT option, PBP will just drop a RETURN at
location 4.