6610,6210 & Mcu

Hi everone,...
I have a problem in connecting my Nokia 6610 to PIC16F84A. I'll use Basic language supported by Mikro Basic compiler from http://www.mikroe.com

I'll use software routines to allow serial communication between the phone and the MCU.

The problem is:
1- Do I need a driver for the phone modem to connect the phone to the MCU via serial RS232 cable?
2- How can I write this AT-command in basic for the MCU? AT+CMSS=1,"012xxxxxxx",129

I'll be glad if you provide me a sample code.

Thanks very muvh for your time.

<<I have a problem in connecting my Nokia 6610 to PIC16F84A. I'll use Basic language supported by Mikro Basic compiler from http://www.mikroe.com>>

Surely you meant Pic Basic Pro by melabs.com...If not, you took a wrong turn in Alberquerqe!

Quote:

---

Originally Posted by Ron Marcus

<<I have a problem in connecting my Nokia 6610 to PIC16F84A. I'll use Basic language supported by Mikro Basic compiler from http://www.mikroe.com>>

Surely you meant Pic Basic Pro by melabs.com...If not, you took a wrong turn in Alberquerqe!

---

Hey! I took a wrong turn in Alberquerqe a couple of months ago! And it wasn't perty either! Ended up the wrong way on a one-way street...not good... On the other hand, I did drive by Microchip's big ol' building in Chandler a few weeks after that...