Printable View
Ok I'm back on the usb quest again...
I've not played for about a year again, so no doubt now remember even less, and google is not (today) my friend....
As I see it if I do find a simple 'ready to go' bootloader for noobs, {/link fairy please insert magical link here} I need to tell pbc to start assembling my work of art higher up the address ladder, I tried ORG 0Xhhhh but it laughed at me, and manual did not seem to list the command.
Whats the right syntax for org?
You can use
DEFINE LOADER_USED 1
OR
DEFINE RESET_ORG 0h (for PIC 18F)
(both are in the manual)
Then I suggest to have a look at my personal favorites:
-Tiny bootloader: http://www.etc.ugal.ro/cchiculita/so...bootloader.htm
-Colt bootloader: http://mdubuc.freeshell.org/Colt/
J-P
Yeah but...
the OP use PBC, not PBP, so the Define Loader don't seems to be supported... unless i overlooked something.
The OP asked for USB bootloader...
Not sure if you can use a bootloader with PBC...
Get ready GrandPa for some more snow tonight :eek:
My only magic link will be Melabs support.
[email protected]
emmmmmmmm
odd result here, if someone wants to take a stab at an explanation.....
I used ''DEFINE RESET_ORG 10h'' and the first thing in my code was ''@clrwdt'' followed by a few more...
So I expected.....
0008: FFFF FFFF FFFF FFFF
0010: 0004 0004 D7FA
but got
0008: EF0A F000 0004 0004 D7FD
emmmmmmm, at least its moving the start, so I can jiggle that to where it needs to be.