Printable View
Good day to all of you in the forum,
I have to replace the pic16f628 with a PIC18F1320.
I want to retain the same PBP basic program. I am not able to make it working: probably there is a fault in the configuration of the program.
It will operate at 20 MHz with an external XTAL. No analog interface is required.
I am asking if someone could help me in setting up the configuration piece of program using PICbasic Pro.
Thanks in advance for any help.
Best regards,
Ambrogio
IW2FVO
Have you tried the Advanced Search feature using 18F1320 CONFIG?
http://www.picbasic.co.uk/forum/show...752#post114752
Robert
Thanks ,
but it refers to a different PIC type.
I would like to define the configuration for using a PIC18F1320 , 20 Mhz Xtal and the possibility to manage very few discretes and an LCD.
I have the PBP program running on a PIC16F628 but not able to transfer it on PIC18F1320.
Any help ?
Thanks for the assistance.
Ambrogio
Hmmm, was sure I had the right PIC.
What about this?
http://www.picbasic.co.uk/forum/show...124#post112124
Robert
Thanks a lot Robert: it is working well now !
Ambrogio