Printable View
I found this code in the forums . And will be a good beginning for my project. What do I need to be able to compile it in PICBASIC without so many errors? A 16f877 at 4 Mhz
Begin:
PVAL = 1000 ' Start with 1kHz
For Duty = 64 to 250
HPWM 1,Duty,PVAL
PAUSE 100
NEXT Duty
Duty = 127 ' 50% Duty-cycle
For PVAL = 1000 to 10000 step 100 ' Increments of 100. Change as needed
HPWM 1,Duty,PVAL
PAUSE 100
Next PVAL
GOTO Begin
END
regular PBC or PBP (pro)?
If you didn't define the variables or you're using PBC, i don't see the error source
PBC don't have the HPWM statement, you'll need to POKE the PIC registers as per the PIC datasheet.
So it would work with PBP? I have the demo and it comes up with a bunch of syntax and bad expression errors Thanks Emmett
Ok i try again..
If you didn't define the variables ... i don't see the error source
X Var BYte
tada var word
etc
etc