I have a Simcom 900D with firmware 1137B06SIM900M64_ST, that supports FTP.
Here is HTTP/FTP AT Command list
Attachment 4992
But no matter how I tried to send a file, always get a net error. The same error also with http.
I don't understand how to use the AT + SAPBR :confused:
I managed to send file like this:
But not using FTP commands.Code:AT+CGEREP=1
OK
at+cipmux=1
OK
AT+CREG=1
OK
AT+CGREG=1
OK
AT+CGATT=1
OK
AT+COPS?
+COPS: 0,0,"YUG 03"
OK
AT+CSTT="gprsinternet","mts","064"
OK
AT+CIICR
OK
AT+CIFSR
172.30.7.93
AT+CIPSTART=0,"TCP","ftp.****.com",21
OK
0, CONNECT OK
+RECEIVE,0,322:
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 2 of 1000 allowed.
220-Local time is now 08:13. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 15 minutes of inactivity.
at+cipsend=0
> User ****@****.com
0, SEND OK
+RECEIVE,0,58:
331 User ****@****.com OK. Password required
at+cipsend=0
> Pass*****
0, SEND OK
+RECEIVE,0,105:
230-User ***@***.com has group access to: **
230 OK. Current restricted directory is /
at+cipsend=0
> pasv
0, SEND OK
+RECEIVE,0,50:
227 Entering Passive Mode (**,147,240,**,32,54)
AT+CIPSTART=1,"TCP","**.147.240.**",8246
OK
1, CONNECT OK
at+cipsend=0
> stor simcom900d muxip.txt
0, SEND OK
+RECEIVE,0,30:
150 Accepted data connection
at+cipsend=1
>test text
1, SEND OK
at+cipsend=0
> bye
0, SEND OK
+RECEIVE,0,21:
500 Unknown command
AT+CIPCLOSE=1
+RECEIVE,0,9:
226-File successfully transferred
226 131.780 seconds (measured here), 0.46 bytes per second
1, CLOSE OK
AT+CIPCLOSE=0
0, CLOSE OK
AT+CPOWD=1
+PDP: DEACT
NORMAL POWER DOWN
Does anyone know how to send the file to the ftp using ftp command, or has some advice, suggestion?
Thanks;)
