PBP registration does not stick, still unregistered

Hey group,
Sent an email to MELABS regarding this problem, but I thought I'd check here as well as I won't hear back from MELABS till tomorrow or later.

I recently moved to a newer computer (windows 10) and when I run microcode studio MCSX it tells me that my registration is not complete and gives me a popup window do to the registration (showing minus one (-1) day left)
When I fill in my name, email, and registration code and choose on-line registration it tells me the registration is good.
But then when I try and compile a program it pops up again with the reg popup.
A few weeks ago when I first did the install I must have been running on the trial period but I assume that has run out.

Can anyone tell me how to make the reg permanent?

thanks in advance
dwight

You may have let your "install window" lapse... I'd ask them for a new regcode, as long as you have proof of purchase. Let us know how that goes, because I may be in the same boat someday.

This did the trick... Thanks to MeLabs!
dwight

Quote:

---

Try running the PBP Activation Manager directly from the PBP3 program group and run as administrator.

Start > PBP 3.1 from ME Labs > PBP Activation Manager

Or

Start > PBP3 from melabs > PBP Activation Manager

Right click on the Activation Manager and select "Run As Administrator".

Charles Leo
ME Labs, Inc.
2845 Ore Mill Road STE 4
Colorado Springs, CO 80904
719-520-5323
fax: 719-520-1867
http://melabs.com

---

Easy Fix!!...
Thanks Charles

Quote:

---

Try running the PBP Activation Manager directly from the PBP3 program group and run as administrator.

Start > PBP 3.1 from ME Labs > PBP Activation Manager

Or

Start > PBP3 from melabs > PBP Activation Manager

Right click on the Activation Manager and select "Run As Administrator".

Charles Leo
ME Labs, Inc.
2845 Ore Mill Road STE 4
Colorado Springs, CO 80904
719-520-5323

---