Compiling error on Elapsed timer

1 Attachment(s)

Hi everyone, I'm trying out Darrel's sample code from http://darreltaylor.com/DT_INTS-18/elapsed.html.

Code:

asm __CONFIG _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L __CONFIG _CONFIG1H, _FOSC_HSPLL_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H __CONFIG _CONFIG2L, _PWRT_ON_2L & _BOR_ON_2L & _BORV_2_2L & _VREGEN_ON_2L __CONFIG _CONFIG2H, _WDT_OFF_2H __CONFIG _CONFIG3H, _MCLRE_ON_3H & _LPT1OSC_OFF_3H & _PBADEN_OFF_3H & _CCP2MX_ON_3H __CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L & _DEBUG_OFF_4L endasm DEFINE OSC 48 DEFINE LCD_DREG PORTB DEFINE LCD_DBIT 0 DEFINE LCD_EREG PORTB DEFINE LCD_EBIT 5 DEFINE LCD_RSREG PORTB DEFINE LCD_RSBIT 4 DEFINE LCD_BITS 4 DEFINE LCD_LINES 2 DEFINE LCD_COMMANDUS 2000 DEFINE LCD_DATAUS 50 INCLUDE "DT_INTS-18.bas" ' Base Interrupt System INCLUDE "ReEnterPBP-18.bas" INCLUDE "Elapsed_INT.bas" ; Elapsed Timer Routines ASM INT_LIST macro ; IntSource, Label, Type, ResetFlag? INT_Handler TMR1_INT, _ClockCount, PBP, yes endm INT_CREATE ; Creates the interrupt processor ENDASM @ INT_ENABLE TMR1_INT ; Enable Timer 1 Interrupts GOSUB ResetTime ' Reset Time to 0d-00:00:00.00 GOSUB StartTimer ' Start the Elapsed Timer Main: IF SecondsChanged = 1 THEN SecondsChanged = 0 LCDOUT $FE,2, DEC Days,"d-",DEC2 Hours,":",DEC2 Minutes,":",DEC2 Seconds ENDIF GOTO Main

But I'm getting some error.
Attachment 6660
I'm using pic18f4550, what do I'm missing in the process?

Thanks in advance,
tacbanon

Re: Compiling error on Elapsed timer

Quote:

INCLUDE "DT_INTS-18.bas" ' Base Interrupt System
INCLUDE "ReEnterPBP-18.bas"
INCLUDE "Elapsed_INT.bas" ; Elapsed Timer Routines

You need to use the 18F version of the Elapsed Timer.
http://darreltaylor.com/DT_INTS-18/downloads.html

Re: Compiling error on Elapsed timer

Thank you for the reply and for the great work DT...

/tacbanon