About 0.96" 128x64 SSD1306
Hi
About 0.96" 128x64 SSD1306 display
Someone to help me with this code that was posted there for some time it only works when it starts the first time.
Any help and welcome on this code
It seems all right to me, isn't it.
Code:
#CONFIG
__config _HS_OSC & _WDT_OFF & _PWRTE_OFF & _CP_OFF & _PWRTE_OFF & _LVP_OFF & _WRT_OFF
#ENDCONFIG
;----[Oscillator Setup]---------------------------------------------------------
DEFINE OSC 20
;----[Initialize Hardware]------------------------------------------------------
TRISA=%11111111:PORTA=%00000000
TRISC=%10000000:PORTC=%00000000
TRISB=%11111111:PORTB=%00000000
OPTION_REG.7=0
I2CDevice var byte
SCL var PortC.3 ' I2C Clock PortB.4
SDA var PortC.4 ' I2C Data PortB.1
TEXT VAR BYTE[20]
LENGTH VAR BYTE[2]
DC VAR Byte ' "DATA OR COMMAND", $40=DATA; $0=COMMAND --> changed from bit to byte
LCD_DATA VAR BYTE
COM VAR BYTE 'COMMAND
'PAGE VAR BYTE'LCD PAGE(B0 TO B7)
I VAR BYTE
J VAR BYTE
X VAR BYTE 'LCD POSITION X(0 TO 127)
Y VAR BYTE 'LCD POSITION Y(0 TO 7)
CLEAR
'=============================================================================
'PAGE = $B0
I2CDevice = $78 ' X/Y/Z = $3C, Display = $78,
PAUSE 20
GOSUB INIT
GOSUB CLEAR_LCD
GOSUB TITLE
MAIN:
COM=$A6:GOSUB SEND_COMMAND '$A6=NORMAL MODE;$A7=INVERSE MODE
'PAUSE 100
COM=$2E:GOSUB SEND_COMMAND
COM=$27:GOSUB SEND_COMMAND
COM=$00:GOSUB SEND_COMMAND
COM=$03:GOSUB SEND_COMMAND
COM=$04:GOSUB SEND_COMMAND
COM=$06:GOSUB SEND_COMMAND
COM=$00:GOSUB SEND_COMMAND
COM=$FF:GOSUB SEND_COMMAND
COM=$2F:GOSUB SEND_COMMAND
PAUSE 10000
End
GOTO MAIN
'=========================lcd initialization====================================
INIT:
COM=$AE:GOSUB SEND_COMMAND' DISPALY OFF
COM=$20:GOSUB SEND_COMMAND' HORIZONTAL MODE
COM=$00:GOSUB SEND_COMMAND
COM=$40:GOSUB SEND_COMMAND' DISPLAY START AT 0
COM=$A1:GOSUB SEND_COMMAND' REMAP 0-127 ----> Mirror display
COM=$C8:GOSUB SEND_COMMAND' SCAN DIRECTION
COM=$DA:GOSUB SEND_COMMAND' COM PINS ------> Not Sure what this does
COM=$10:GOSUB SEND_COMMAND' COM PINS ------> Not Sure what this does
COM=$A4:GOSUB SEND_COMMAND' DISPLAY ON
COM=$A7:GOSUB SEND_COMMAND' $A6=NORMAL MODE;$A7=INVERSE MODE
COM=$AF:GOSUB SEND_COMMAND' DISPLAY ON
return
'===============================================================================
'==============================clear lcd========================================
CLEAR_LCD:
FOR J=0 TO 7
FOR I=0 TO 127
LCD_DATA=$00:GOSUB SEND_DATA ' was $00
NEXT I
NEXT J
RETURN
'****************SEND COMMAND************************************************
SEND_COMMAND:
dc=$0
I2CWrite SDA,SCL,I2CDevice,DC,[COM]
dc=$40
RETURN
'======================Send data===============================================
SEND_DATA:
DC=$40
I2CWrite SDA,SCL,I2CDevice,DC,[LCD_DATA]
RETURN
'=============================FILL=============================================
FILL:
FOR J=0 TO 7
FOR I=0 TO 127
LCD_DATA=$FF:GOSUB SEND_DATA
NEXT I
NEXT J
RETURN
'=========================TITLE=================================================
TITLE:
X=0:Y=0 :GOSUB SET_XY
FOR I=0 TO 127
LOOKUP I,[$00,$40,$60,$50,$7E,$50,$60,$40,$02,$06,$0E,$1E,$3E,$00,$00,$00,_
$00,$00,$00,$00,$00,$1F,$3F,$60,$60,$60,$60,$60,$60,$3C,$1C,$00,_
$00,$7F,$7F,$61,$61,$61,$61,$61,$61,$3F,$1E,$00,$00,$1E,$3F,$61,_
$61,$61,$61,$61,$61,$38,$18,$00,$00,$00,$00,$00,$00,$00,$00,$00,_
$00,$00,$00,$00,$00,$00,$00,$1F,$3F,$60,$60,$60,$60,$60,$60,$3C,_
$1C,$00,$00,$1E,$3F,$61,$61,$61,$61,$61,$61,$38,$18,$00,$00,$3F,_
$7F,$60,$18,$06,$06,$18,$60,$7F,$3F,$00,$00,$00,$00,$00,$00,$00,_
$00,$00,$00,$1C,$63,$41,$5D,$41,$5D,$41,$5D,$41,$5D,$41,$7F,$00],LCD_DATA
lcd_data=lcd_data rev 8
GOSUB SEND_DATA
NEXT I
X=0:Y=1 :GOSUB SET_XY
for i=0 to 127
lookup i,[$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,_
$00,$00,$00,$00,$00,$F8,$FC,$06,$06,$06,$C6,$C6,$C6,$FC,$F8,$00,_
$00,$FE,$FE,$80,$80,$80,$80,$80,$80,$00,$00,$00,$00,$18,$1C,$86,_
$86,$86,$86,$86,$86,$FC,$78,$00,$00,$00,$00,$00,$00,$00,$00,$00,_
$00,$00,$00,$00,$00,$00,$00,$F8,$FC,$06,$06,$06,$C6,$C6,$C6,$FC,_
$F8,$00,$00,$18,$1C,$86,$86,$86,$86,$86,$86,$FC,$78,$00,$00,$FE,_
$FE,$00,$00,$00,$00,$00,$00,$FE,$FE,$00,$00,$00,$00,$00,$00,$00,_
$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00],lcd_data
lcd_data=lcd_data rev 8
GOSUB SEND_DATA
NEXT I
X=0:Y=3:GOSUB SET_XY
for i=0 to 127
lookup i,[$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$3C,$7E,$C3,$C3,$C3,$C3,_
$C3,$C3,$71,$30,$00,$00,$7F,$FF,$C3,$C3,$C3,$C3,$C3,$C3,$C3,$C3,_
$00,$00,$7F,$FF,$C1,$C1,$C1,$C1,$C1,$C1,$FF,$7F,$00,$00,$7F,$FF,_
$C3,$C3,$C3,$C3,$C3,$C3,$7E,$3C,$00,$00,$3F,$7F,$C0,$C0,$C0,$C0,_
$C0,$C0,$70,$30,$00,$00,$FF,$FF,$03,$03,$03,$03,$03,$03,$FF,$FF,_
$00,$00,$C0,$C0,$C0,$C0,$FF,$FF,$C0,$C0,$C0,$C0,$00,$00,$FF,$FF,_
$0C,$0C,$03,$03,$00,$00,$FF,$FF,$00,$00,$3F,$7F,$C0,$C0,$C0,$C1,_
$C1,$C1,$79,$39,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00],lcd_data
lcd_data=lcd_data rev 8
GOSUB SEND_DATA
NEXT I
X=0:Y=4:GOSUB SET_XY
for i=0 to 127
lookup i,[$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$30,$38,$0C,$0C,$0C,$0C,_
$0C,$0C,$F8,$F0,$00,$00,$F8,$FC,$0C,$0C,$0C,$0C,$0C,$0C,$0C,$0C,_
$00,$00,$FC,$FC,$80,$80,$80,$80,$80,$80,$FC,$FC,$00,$00,$FC,$FC,_
$80,$C0,$60,$30,$18,$0C,$04,$00,$00,$00,$F0,$F8,$0C,$0C,$0C,$0C,_
$0C,$0C,$38,$30,$00,$00,$FC,$FC,$00,$00,$00,$00,$00,$00,$FC,$FC,_
$00,$00,$0C,$0C,$0C,$0C,$FC,$FC,$0C,$0C,$0C,$0C,$00,$00,$FC,$FC,_
$00,$00,$00,$00,$C0,$C0,$FC,$FC,$00,$00,$F0,$F8,$0C,$0C,$0C,$8C,_
$8C,$8C,$F8,$F0,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00],lcd_data
lcd_data=lcd_data rev 8
GOSUB SEND_DATA
NEXT I
X=0:Y=5:GOSUB SET_XY
for i=0 to 127
lookup i,[$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$1F,$3F,$30,$30,$30,$30,_
$30,$30,$30,$30,$00,$00,$0F,$1F,$30,$30,$30,$30,$30,$30,$1F,$0F,_
$00,$00,$1F,$3F,$30,$30,$30,$30,$30,$30,$1F,$0F,$00,$00,$00,$00,_
$00,$00,$00,$0F,$1F,$30,$30,$30,$30,$30,$30,$1C,$0C,$00,$00,$30,_
$30,$30,$30,$3F,$3F,$30,$30,$30,$30,$00,$00,$0F,$1F,$30,$30,$30,_
$30,$30,$30,$1E,$0E,$00,$00,$3F,$3F,$03,$03,$00,$00,$00,$00,$3F,_
$3F,$00,$00,$1F,$3F,$30,$30,$30,$30,$30,$30,$3F,$1F,$00,$00,$3F,_
$3F,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00],lcd_data
lcd_data=lcd_data rev 8
GOSUB SEND_DATA
NEXT I
X=0:Y=6:GOSUB SET_XY
for i=0 to 127
lookup i,[$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$FF,$FF,$C0,$C0,$C0,$C0,_
$C0,$C0,$00,$00,$00,$00,$FC,$FE,$03,$03,$03,$03,$03,$03,$FE,$FC,_
$00,$00,$FF,$FF,$E0,$F0,$D8,$CC,$C6,$C3,$81,$00,$00,$00,$00,$00,_
$00,$00,$00,$0C,$8E,$C3,$C3,$C3,$C3,$C3,$C3,$7E,$3C,$00,$00,$03,_
$03,$03,$03,$FF,$FF,$03,$03,$03,$03,$00,$00,$FC,$FE,$03,$03,$03,_
$63,$63,$63,$7E,$7C,$00,$00,$FF,$FF,$00,$00,$C0,$C0,$30,$30,$FF,_
$FF,$00,$00,$FF,$FF,$60,$60,$60,$60,$60,$60,$FF,$FF,$00,$00,$FF,_
$FF,$03,$03,$03,$03,$03,$03,$03,$03,$00,$00,$00,$00,$00,$00,$00],lcd_data
lcd_data=lcd_data rev 8
GOSUB SEND_DATA
NEXT I
RETURN
'===========================================SET X AND Y=========================
SET_XY:
COM=$21:GOSUB SEND_COMMAND
COM=X:GOSUB SEND_COMMAND
COM=127:GOSUB SEND_COMMAND
COM=$22:GOSUB SEND_COMMAND
COM=Y:GOSUB SEND_COMMAND
COM=Y:GOSUB SEND_COMMAND
RETURN
'===============================================================================
END
Re: About 0.96" 128x64 SSD1306
Your main loop is this:
Code:
MAIN:
COM=$A6:GOSUB SEND_COMMAND '$A6=NORMAL MODE;$A7=INVERSE MODE
'PAUSE 100
COM=$2E:GOSUB SEND_COMMAND
COM=$27:GOSUB SEND_COMMAND
COM=$00:GOSUB SEND_COMMAND
COM=$03:GOSUB SEND_COMMAND
COM=$04:GOSUB SEND_COMMAND
COM=$06:GOSUB SEND_COMMAND
COM=$00:GOSUB SEND_COMMAND
COM=$FF:GOSUB SEND_COMMAND
COM=$2F:GOSUB SEND_COMMAND
PAUSE 10000
End
GOTO MAIN
According to this lines, it should send the commands, wait 10sec and then ... END! Meaning the PIC enters an endless loop for ever. So, it realy does what you wanted to do!
Maybe you wanted to do the above of MAIN series of GOSUB's?
Ioannis.
Re: About 0.96" 128x64 SSD1306
Thanks
Ioannis.
It is already running
Thank you for your answer
peace
