-
% test
Code:
ANSEL=%00000000 ' ADC SET FOR DIGITAL
CMCON=7 ' COMPARATOR SET FOR DIGITAL
SWITCH_OFF VAR GPIO.1 ' PUSH BUTTON FOR PUMP OFF
SWITCH_RUN VAR GPIO.2 ' PUSH BUTTON FOR PUMP ON
LED_RUN VAR GPIO.0 ' INDICATE RUN SIGNAL SENT
LED_OFF VAR GPIO.5 ' INDICAT STOP SIGNAL SENT
TX VAR GPIO.4 ' DATA SEND PIN
BAUD CON 18030 ' 18030 = 600 BAUD
A % will sometimes be stripped and upper case is turned to lower case. When I code in PBP I have caps lock on so it is not a MCS thing.
EDIT--- in preview the format was all wrong but the post is not so bad??
-
Re: % test
doing my own playing here
Code:
ansel = % 01001100
ansel = %01001100
ansel =%01001100
ansel=%01001100
ANSEL=%01001100
ANSEL =%01001100
ANSEL = %01001100
ANSEL = % 01001100
should be:
ansel = % 01001100
ansel = %01001100
ansel =%01001100
ansel=%01001100
ANSEL=%01001100
ANSEL =%01001100
ANSEL = %01001100
ANSEL = % 01001100
advanced editor
Code:
ansel = % 01001100
ansel = %01001100
ansel =%01001100
ansel=%01001100
ANSEL=%01001100
ANSEL =%01001100
ANSEL = %01001100
ANSEL = % 01001100
