IR/RF Remote Control

Hi All,
I recently came across some programming on the web for an IR/RF Remote Control. (http://jap.hu/electronic/codec.html) I managed to build the circuit and get it operational with the supplied program. I am using the eight channel version but by default it is set to a Latched output.

Does anyone know how i would go about changing it from Latched to Momentary, i think it has something to do with line 36.


Thanks for the help in advance.
Jeremy

Hi jhorsburgh,

I've never used that program before, but looking at the code, it appears that each bit in the LATCH_MASK constant determines if the corresponding channel is Latched or Momentary.

0xFF = all output's latched
0x00 = all output's momentary
0xF0 = top 4 bit's Latched, bottom 4 momentary.

I beleive VALID_BIT should also be 8, for the 8 channel version.

hth,

That worked perfectally.

Thank very much for your help DT.

Jeremy