Re: Bluetooth HC-05 Question
Look at command set:
https://www.itead.cc/wiki/Serial_Por...Slave)_:_HC-05
Be aware that there is several fw for HC-05. I have build programmer for them that worked on parallel port. So I could write FW that is best suited for me.
You have several options, you can:- disconnect using AT+DISC
- reset module AT+RESET
- remove all auth devices, AT+ RMAAD.
I hope that this will help...
Re: Bluetooth HC-05 Question
if you use esp8266 IP device for serial comms, it will take up to 5 simultaneous connections.